Lippert PROPER STORAGE OF GIRARD GRF16DBGS Manual

Purpose
This document outlines the procedures for proper storage of Girard refrigerators.
Proper Storage Information
Properly storing the refrigerator can prevent irregular cooling performance and help combat component
damage. If the refrigerator is not properly turned off (stored) it continues to operate while in storage,
causing the appliance to overwork in extreme conditions beyond its intended design. The refrigerator
control then detects an erroneous operating parameter/condition and locks out the systems to protect itself
until power is reset. To prevent system lock-out, perform the following proper storage steps.
Failure to follow proper storage procedures for the refrigerator could result in product damage and/or
Proper Storage Procedures for Model GRF16DBGS
If the unit/appliance is in storage (closed up/not in use) the refrigerator model # GRF16DBGS should always
be turned off using the controls of the refrigerator. The battery disconnect is NOT sufficient for ensuring the
refrigerator is off. Physically turning off the refrigerator is required per the below instructions.
1.
Locate the user control panel on the front of the refrigerator.
2.
Long press Function button (Fig. 1A) for 5 seconds to turn the refrigerator's LOW POWER mode on/off.
Rev: 08.22.2024
PROPER STORAGE OF GIRARD
MODEL NO: GRF16DBGS
REFRIGERATORS
voiding the warranty.
REFRIGERATORS
®
Fig. 1
A
Page 1
CCD-0008374