Download Print this page

Aurora Audio GT500 Product Manual

Mic pre

Download this manual

GT500 Mic Pre

Product Manual

Need help?

Do you have a question about the GT500 and is the answer not in the manual?

Page 1 GT500 Mic Pre Product Manual...
Page 2 = 0VU = +4dBu = 1.228 volts ac = approx -18dBf (see below). When using the GT500, set the output level pot to maximum and, talking or singing or playing an instrument, increase the red input gain control until the amber LED lights. Leave the settings there because that is the optimum recording level to use to maintain headroom.
Page 3 N.B.The GT500 should not be operated with the LED constantly lit. Besides most likely being above the clipping point of the A to D converter (and digital distortion sounds horrid!) it can lead to damage to the circuitry from overheating. For good headroom, the LED should never flash and occasional flashes are an indication of loss of signal headroom.
Page 4 Warranty: ONE YEAR PARTS AND LABOR LIMITED WARRANTY Aurora Audio International warrants this GT500 unit against defects in workmanship for a period of one year and parts for a period of one year from receipt by the original end user. This warranty shall not apply...