Toolbars; Audio Control Buttons - LENCO L-3866 USB Instruction Manual

Toolbars

Selection tool - for selecting the range of audio you want to edit or
listen to.
Envelope tool - for changing the volume over time.
Draw tool - for modifying individual samples.
Zoom tool - for zooming in and out.
Timeshift tool - for sliding tracks left or right.
Multi tool - lets you access all of these tools at once depending on the
location of the mouse and the keys you are holding down.

Audio Control Buttons

Skip to Start - moves the cursor to time 0. If you press Play at this
point, your project will play from the beginning.
Play - starts playing audio at the cursor position. If some audio is
selected, only the selection is played.
Loop - if you hold down the Shift key, the Play button changes to
a Loop button, which lets you keep playing the selection over and
over again.
Record - starts recording audio at the project sample rate (the
sample rate in the lower-left corner of the window). The new track
will begin at the current cursor position, so click the "Skip to Start"
button first if you want the track to begin at time 0.
Pause - temporarily stops playback or recording until you press
pause again.
Stop - stops recording or playing. You must do this before
applying effects, saving or exporting.
9