Initial Starting-Up; Mains Connection; Amplifier Connection; Playing A Record - LENCO L-3866 USB Instruction Manual

INITIAL STARTING-UP

MAINS CONNECTION

Ensure that the mains voltage of your home corresponds to the operating
voltage of the unit. Your unit is ready to be connected to a mains voltage of
110V/60Hz or 220V/50Hz.

AMPLIFIER CONNECTION

Connect audio plugs to Alert input on your mixer or amplifier:
Red plug into R/H channel input.
White plug into L/H channel input.

Playing a record

- Remove the Dust cover from the turntable.
- Place the record of your choice on the turntable. If it is a 45 rpm, do not
forget to place the adaptor on the record spindle.
- Choose the desired playing speed:
33 rpm -> button unlocked
45 rpm-> button locked.
Release the Tone-arm lock.
-
Push in the arm lift button (tone-arm will go up)
-
Place the cartridge vertically over the first track of the record the
-
turntable starts turning
Push out the arm lift button (tone-arm will lower record starts playing)
-
When the record is over, the tone-arm returns to its rest and the
-
turntable starts turning.
Remark: While the record is ON, If you wish to:
Stop the record while its playing
Press the stop button; the cartridge comes up and returns to it's
−
rest; the turntable stops turning.
Replace the protective cap on the stylus
−
Close the tone-arm lock.
5