Connections - LENCO DVT-2451 Instruction Manual

Connections

Connections
SD/MS/MMC
USB
POWER: Connect to the mains adaptor.
SCART: Connect them to the SCART video output terminal of DVD.(used in component source)
YPbPr: Connect them to the YPbPr video output terminal of DVD.(used in component source)
VIDEO: Connect it to video output terminal of DVD.
R/L in: Connect them to the audio output terminal of DVD.(shared with YPbPr)
HDMI: Connect it to the HDMI of DVD or other equipment.
USB-for update: USB jack-for update.
VGA: For PC display.Connect it to the D-Sub 15 pins analog output connector of the PC.
PC-IN: Connect it to the audio output terminal of PC.
Coax: Digital coaxial output.
Common Interface: CI slot.
RF: Connect antenna or cable 75 Ohm coaxial to receive TV signal.
Headphone: Connect it to your headphone or other audio equipment.
WARNING: Prolonged exposure to loud sounds from personal music players may lead to
temporary or permanent hearing loss. When participating in the traffic listening to an personal
music player can make the listener less aware of potential dangers such as approaching cars.
USB:USB jack.
SD/MMC/MS:card reader.
-for update
5