LENCO DVT-221 Quick Manual

Preparation / installation:
Connect the AC ADAPTER to a 230V. AC wall outlet and the
(7)
12V. DC input of the unit.
Connect the antenna to the antenna input
Insert the batteries into the remotecontrol.
Press the "Power" button, the device is ready for use.
2
Power
Source
Enter
QUICK-GUIDE
(2)
of the unit.
(backside of the unit)
7
TV setup menu
UP/DOWN/LEFT/RIGHT
DVD setup
DVT-221
In the following chapters the features TV and DVD will be
explained
Setup / Basic operation TV:
1 Select TV with the "Source" button
2 Press the "TV setup menu" button repeatedly until
you get to the "TV menu"
3 Select "Auto Search" in the OSD menu by navigating
with the "UP/DOWN"buttons, press the "RIGHT"
button to enter the auto search menu
4 Select "BG/DK/I" or "SECAM L", PAL-BG is used for
most european countries (for more on this topic
please refer to chapter "OSD basic adjustment" in
the manual), then select yes and confirm with the
"Enter" button
5 When ready, exit the menu with the "TV setup
menu" button
6 Select the channels with the "program +/-" button
Basic operation DVD/CD:
1 Select DVD with the "Source" button
Insert a DVD/CD (label facing away from you) into the
2
slot at the left side of the unit
The unit will pull in the disc by itself! So don't push
Wait unil the unit shows you the disc menu or until it
3
starts to play the content automatically
Use the buttons on the remote or the buttons on the left
4
side of the unit to playback a DVD/CD
Please refer to the manual for a more detailed
explanation about the button functions.
Please refer to the manual for a more detailed description of how to
operate the unit or how to setup the unit to your personal taste.