Basic Operation - LENCO DVT-2451 Instruction Manual

Basic Operation

Power on/off
1. Connect to the power supply with a power code and an adaptor.
2. -To turn on the TV
Press POWER button on the TV or remote control.
-To turn off the TV
Press POWER button on the TV or remote control.
Input Source select
Press INPUT button on the TV set or remote control to display the
input source menu, and use CH+/- button on the TV set or ∧/∨ button
on remote control to select the input source, press OK button on the
remote control to enter.
Note: Before you select the input source, make sure the
connections are prepared.
Signs on the screen
Mute
Basic OSD Menu operation
Press MENU button to display the OSD menu as below:
Main menu: VIDEO AUDIO TV SETUP TIME OTHERS
Brightness
Contrast
Saturation
Sharpness
Use / button to select the main menu, and press
In the submenu, use ∧ /
the adjust/setup menu.
* (Press MENU button to return to the upper menu.)
* (Press EXIT button to exit the menu display.)
Note1: Only when you input the suitable signal, the relevant items can be activated
Note2: Please operating the OSD menu according to hint on the bottom of the banner.
No signal
50 Picture Mode
50 Color Temp
50 NR
50
MPEG NR
Cinema Mode
Move ENTER Select Exit Exit
/ / button to select the function item, press OK button to enter
∨
Custom
Normal
Medium
Low
Low
button to enter the submenu.
∨
8
Basic Operation
SOURCE
DTV
ATV
AV
SCART
YPBPR
PC
HDMI
DVD
Submenu
(Video menu
for example)
Hint---you should operate
the OSD menu according
to the hint.