LENCO DVP-854 Owner's Manual page 46

General Setup Page
Audio Setup Page
System Setup
6. Memory
This item is used to set last memory state.
Note: The last memory refers to resume playback
from the point that you stopped last time.
Press the or button to highlight this item.
Press the ENTER or to enter the item.
The default setting of this item is off.
Press the or button to choose on or off.
Press the ENTER button to confirm your selection.
Press the direction button to exit this item.
The item included in this sub-menu is shown on the
left.
1.Downmix
This item is used to set downmix mode.
Press the or button to highlight this item.
Press the ENTER or to enter the item.
It includes Lt/Rt and stereo, stereo by default.
Note: The function of Lt/Rt is to output mixed audio
in the format provided by Dolby. The function of
stereo is to output stereo signal.
Press the or button to choose the proper one.
Press the ENTER button to confirm your selection.
Press the direction button to exit this item.
2. Audio Out
This item is used to set downmix mode.
Press the or button to highlight this item.
Press the ENTER or to enter the item.
It includes SPDIF/OFF,SPDIF/RAW,SPDIF/PCM.
46