Using Of Usb And Sd Card - LENCO DVP-854 Owner's Manual

1. Connect the unit with the power supply.
2. Press the "POWER" button to turn on the power.
3. Push DVB / DVD / USB/SD button to enter USB or SD playback statement.
4. Insert the USB device into the unit's USB slot on the left side of the unit, or insert
the SD card into the SD card slot (located on top of the unit). Please see the below
figure:
Make sure that files of MP3, JPEG or DIVX format are stored in the USB and the
SD card before the connection.
Press the DVB/DVD/USB/SD button to switch among disc playback, USB playback
and the SD playback.
Press the / direction buttons to switch MP3, JPEG or DIVX playback statement,
press ENTER/OK button to enter.
Press the , button to select the folder, and press ENTER/OK button to enter.
Press and buttons to select the desired track. Then press
Press STOP button to stop playback: if the STOP button is pressed, the playback
will start from the beginning of the current track. Press the
folder menu.
Pull out the USB or SD card directly after the MP3, JPEG or DIVX format files are played.
Then the unit will be in the state of disc playback again.
NOTE: the USB slot can not be used for camera with USB function or connected with
other devices.
Using of USB and
SD Card
button to return to the
10
to start playback.