Advertisement
Quick Links
LIMITED WARRANTY
Bass Inferno warrants any products purchased in the U.S.A.
from an authorized Bass Inferno dealer. All products are warranted to
be free from defects in material and workmanship under normal use
and service for a period of one (1) year. This warranty applies to the
original purchase only.
Bass Inferno will either repair or replace (as its option) any unit
that has been found to be defective and under warranty provided the
defect occurs within the one (1) year warranty period.
This limited warranty does not extend to units have been
subjected to misuse, abuse, neglect, or accident. In Bass Inferno's
judgment, products that show evidence of having been altered, modi-
fied, or serviced without Bass Inferno's authorization, will be ineligible
under this warranty.
To obtain warranty service please contact your retailer or visit
our website at www.bassinferno.com for more details.
DB Research L.L.P.
302 Hanmore Industrial Parkway // Harlingen, TX 78550
ph: 877.787.0101 // fx: 956.421.4513 // www.bassinferno.com
®
BI2150.2 BI2250.2 BI4300.4 BI4400.4
BI1000M
AMPLIFIERS
Instruction Manual
• Installation Instructions / Owners Manual •
Due to continuous improvement of the product the Specifications are subject to change without notice.
BI1250M
Advertisement
Related Manuals for Bass Inferno BI2150.2
Summary of Contents for Bass Inferno BI2150.2
- Page 1 (1) year. This warranty applies to the original purchase only. Bass Inferno will either repair or replace (as its option) any unit that has been found to be defective and under warranty provided the BI2150.2 BI2250.2 BI4300.4 BI4400.4...
- Page 2 Congratulations on your purchase of a Bass Inferno state-of-the-art power amplifier. Your use amplifiers power wire at the battery selection of a Bass Inferno car audio product indicates a true appreciation of fine musical reproduction. Whether adding to an existing system or including your Bass Inferno Be sure to fuse the power wire within 12”...
- Page 3 The “Bass Inferno” amplifiers include a built-in variable crossovers. The crossover features a variable frequency selection for precise low pass filtering for the BI1000M, and BI1250M. The BI2150.2, BI2250.2, BI4300.4, and BI4400.4 also offer the same frequency selection with the option of low or high pass filtering.
- Page 4 OUNTING LOCATION OWER CONNECTIONS Before you start the installation, it will be necessary to find a mounting location for the ampli- fier. Find a location in which the amplifier will receive adequate ventilation in order to dissipate the heat it develops during operation. Two popular mounting locations are in the trunk or under the seat.
- Page 5 X-OVER intended for ease of connection when running multiple woofers. LEVEL LOW PASS HIGH PASS 0 6 12 50Hz 250Hz 120Hz 3kHz BI2150.2 2 Channel Stereo Amplifier SPEAKER OUTPUT FUSE +12V POWER INPUT BI1250M Monoblock Amplifier SINGLE SUBWOOFER CONNECTION 4 Ohm Speaker...
- Page 6 PEAKER CONNECTIONS PEAKER CONNECTIONS (BI2150.2 , BI2250.2 , BI4300.4 , BI4400.4) (Bridged) Bass Inferno Make the speaker connections using speaker wire that is at least 16 gauge or heavier. As with any audio component, proper phasing of the amplifier and speakers is essential for strong bass response.
- Page 7 Input Level Fine tune the amplifier’s input sensitivity The gain sensitivity control for the “Bass Inferno” amplifier is located on the side panel. This gain control has been included to allow adjustment to properly match the output of the radio. This is one of the most misunderstood adjustments. By rotating the control in the clockwise direction, the amplifier’s input will become more sensitive and the music will...
- Page 8 11.2V - 14.4V 11.2V - 14.4V +12V at power terminal Check connection +12V at remote terminal Check connection BI2150.2 BI2250.2 Grounding point clean and tight Check for ground w/meter Output Power : Head Unit’s fader not in center position Set to center position...
Need help?
Do you have a question about the BI2150.2 and is the answer not in the manual?
Questions and answers