Playing Discs; Removing Discs; Mode Settings; Stopping The Playing - LENCO DVP-1040 Manual

9.2 Playing discs

1) Eject disc when there is a disc in the unit
2) Insert disc
3) Reading disc
(1) Display DVD or VCD or CD in LCD.
(2) The unit will be played for some disc
(3) Press PLAY to play disc
Note: 1) Please insert disc correctly
2) Do not use the disc that is scratched serious

9.3 Removing discs

1) Press STOP to stop play
2) Press EJECT to eject disc
3) Take out the disc
9.4 Mode settings (Brightness/Contrast/Color/ TFT display mode/TFT overturn
mode/ PAL Plus(only for ATV mode)
Please press MODE (remote control) or LCD display (in the main unit) to select a
suitable mode for your favourite when the main unit is in play mode.
1) Press MODE, setting brightness;
2) Press MODE, setting color;
3) Press MODE, setting contrast;
4) Press MODE, setting LCD display mode;
5) Press MODE, setting overturn mode;
6) Press MODE, setting overturn mode;
7) Press MODE, In ATV mode, setting PAL Plus ON or OFF.

9.5 Stopping the playing

1) Press STOP to pause the playing, the unit can memorize the play point
2) Press PLAY to continues play from the pausing point
3) Press STOP to stop the disc
Note: The unit can not play to continues playing for some disc

9.6 Pausing the disc

1) Press PLAY/PAUSE to pause the playing when playing
2) Press PLAY/PAUSE to continues playing

9.7 Scanning forward and backward

1) Press REV/FWD (the remote control ) 1.5 seconds to fast the playing when playing in
forward/backward direction
2) Change the playing speed to X2, X4, X8, X20 and normal for every pressing
REV/FWD in the remote control unit.
16