When you select Auto Scan, the unit will be shown as following:
You could use cursor Up/Down to select country or start scan.
(1) Select country
Use cursor left/ right to select the country which you want.
You could use
to return and use SETUP to exit.
(2) Start Scan
Press ENTER to confirm. And the unit will be shown as following:
The main unit will search the program automatically.
Using SETUP to stop and exit.
12.5.2 Manual Scan
When you select Manual Scan, the unit will be shown as following:
You could use cursor Up/Down to select country, scan type, start channel. Use cursor left/
right to select the correct setup which you want.
Then use cursor UP/DOWN to select start scan and press ENTER to confirm.
You could use
to return and use SETUP to exit.
12.5.3 Default Setup
32