Table of Contents
Advertisement
OPERATION.
-
PI SOUND mode:
When above different PI sound (DIP) is
heard once in a while, the DIP's sound
will be heard for a short time.
-
PI MUTE mode:
Under above same situation, a mute
sound will be heard for a short time.
c)
RETUNE L or RETUNE S mode
The initial time of automatic TA search or
PI search modes is selected.
When PI information is not caught for
retune time, the radio starts to retune to
next same PI station.
When same PI station does not catch 1
cyclic search, the radio goes to last
station and waits for several minutes
until PI code is received.
-
RETUNE L mode:
Selected as 90 seconds.
-
RETUNE S mode:
Selected as 30 seconds.
d)
MASK DPI or MASK ALL mode
The AF frequency (which has different PI
or NO RDS signal with high field strength)
is masked during checking PI when the
unit searches AF. The unit doesn't
search this AF (DIP) for few minutes. In
the case of the AF of NO RDS signal
with high field strength, if the real AF is
wrongly masked as DIP by some
interference, the unit hesitates to search
real Afs. For this reason, the unit has the
user option (MASK DPI) which doesn't
mask the AF of NO RDS signal with high
field strength. In MASK DPI mode, the
wrong sound
or long mute (according to PI SOUND or
PI MUTE) can be heard from the AF
station which has NO RDS signal and of
which the field strength is higher than
that of the currently tuning AF (station).
But, these phenomenons are rare and
the user will hardly hear the wrong
sound in whole Europe.
-
MASK DPI mode:
Masked only the AF which has
different PI.
-
MASK ALL mode:
Masked
different PI and NO RDS signal with high field
strength.
6.
RDS
(RADIO
OPERATION
-
Setting RDS mode
In FM mode. Press AF button to switch
on or off AF mode. Whenever AF is switch
on, symbol "AF" appears on the display.
Program name is displayed on receiving a
RDS station.
"AF" starts blinking if the broadcasting
signal getting worse.
"ALARM" will be displayed when an
emergency
broadcasting
meanwhile sound output level will be
adjusted to the preset output level
automatically when the volume control is
set at minimum.
- Using PTY to Select Program
Press PTY/SHF button. It will list all the
program type on LCD as below:
NEWS / AFFAIRS / INFO / SPORT /
EDUCATE / DRAMA / CULTURE / SCIENCE /
VARIED / POP M / ROCK M / EASY M / LIGHT
M / CLASSICS / OTHER M / WEATHER /
FINANCE / CHILDREN / SOCIAL / RELIGION
/ PHONE IN / TRAVEL / LEISURE / JAZZ /
18
the
AF
which
has
DATA
SYSTEM)
is
received,
Advertisement
Table of Contents
