Operation; Basic Operation; Radio Operation - LENCO CS-180 DVD Owner's Manual

OPERATION

BASIC OPERATION

SWITCHING ON/OFF THE UNIT
Press PWR button on the front panel or
POWER button on the remote control to
turn on the unit.
FACEPLATE RELEASE
Press button on the front panel to
detach the removable faceplate.
SOUND ADJUSTMENT
Press SEL button on the front panel of
the unit or on the remote control to
select the desired adjustment mode.
The adjustment mode will change in the
following order:
VOL BASS TRE
(Volume) (Bass) (Treble) (Middle)
By pressing the VOLUME /VOLUME
buttons on the front panel or VOL +/-
buttons on the remote control, it is
possible to adjust the desired sound
quality.
MUTE
Press and hold PTY button on the front
panel or (MUTE) button on the remote
control for several secounds to mute down
the sound instantly. Press it again to
resume sound output.
EQUALIZATION
Press EQ (AUDIO) button on the remote
control shortly to turn on equalization
function and to select desired audio mode.
There are three kinds of mode as below:
FLAT CLAS POP
MODE SELECTION
Press MOD button on the front panel of
the unit or MODE button on the remote
control to select among radio, disc
(DVD/VCD/CD/MP3) play mode and AV
IN mode.
LIQUID CRYSTAL DISPLAY
Exhibit current frequency and activated
functions on the display of the front
panel.
MID BAL FAD
(Balance) (Fader)
ROCK DSP OFF
REMOTE SENSOR
Point the remote control handset to the
remote sensor IR. Press the function
keys on the handset to control the
system.
RESET FUNCTION
RESET button on the housing must be
activated with either a ballpoint pen or
thin metal object. The RESET button is
to be activated for the following reasons:
- Initial installation of the unit when all
wiring is completed.
- All the function buttons do not operate.
- Error symbol on the display.
Note: if press RESET button, the unit
can't work yet, please use a cotton swab
soaked in isopropyl alcohol to clean the
socket on the front panel.

RADIO OPERATION

SWITCHING TO RADIO MODE
Press MOD on the front panel or MODE
on the remote control to select radio
mode, the radio mode appears in the
display together with the memory band
and frequency.
SELECTING THE FREQUENCY BAND
During radio mode, shortly press
BND/MEN button on the front panel or
BAND (MENU) button on the remote
control to select the desired band. The
reception band will change in the following
order:
FM1 FM2
SELECTING STATION
During radio mode, shortly press
MANU/SKIP
panel or button on remote control to
increase frequency by one step of channel
spacing, and shortly press MANU/SKIP
on the front panel or
remote control to decrease frequency by
one step of channel spacing. Hold the
button longer for fast tuning. The
frequency is updated correspondingly on
display.
15
FM3 MW1 MW2
button on the front
button on