Using The Detachable Front Panel - LENCO CS-173 DAB Owner's Manual

USING THE DETACHABLE FRONT PANEL

To Detach the Front Panel
1. Press the OPEN button, the front panel
will slide down.
2. Remove the front panel by pulling its
middle-hand side outward.
3. For safekeeping, store the front panel
in the supplied protective case
immediately after being removed.
Front Panel
4. Push the front metal plate into the main
body. A 'click' sound will be heard.
To Install the Front Panel
1.When the metal plate is folded down,
2. Note that if the front panel fails to lock
Protective Case
Precautions when handling
1. Do not drop the front panel.
2. Do not put pressure on the display or
3. Do not touch the contacts on the front
4. If any dirt or foreign substances
5. Do not expose the front panel to high
6. Keep away any volatile agents (e.g.
7. Do not attempt to disassemble the
6
insert the front panel into the metal
plate then push them into the main
body. A 'click' sound should be heard.
in position properly, pressing control
button may not function and the
display may be missing some
segments. Press the OPEN button
and then reinstall the front panel
again.
control buttons when detaching or
reinstalling the front panel.
panel or on the main unit body. It may
result in poor electrical contact.
adhered on the contacts, they can be
removed with a clean and dry cloth.
temperatures or direct sunlight in
anywhere.
benzene, thinner, or insecticides) from
touching the surface of the front panel
front panel.