LENCO CR-333 Owner's Manual

LENCO CR-333 Owner's Manual

Dual alarm am/fm clock radio with triple display, touchless snooze and display control and smartset automatic time setting system
Hide thumbs Also See for CR-333:

Advertisement

Quick Links

CR-333 OWNER S MANUAL
Dual Alarm AM/FM Clock Radio
with Triple Display,
Touchless Snooze and Display Control
SmartSet
and
®
Automatic Time Setting System
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN
EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES
CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE
OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

IMPORTANT SAFETY INSTRUCTIONS

1.) Read these instructions. Keep these instructions. Follow all instructions. Heed all warnings.
2.) Do not use this apparatus near water.
3.) Clean only with dry cloth.
4.) Do not block any ventilation openings. Install in accordance with the manufacturer s instructions.
5.) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
6.) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong is provided for your safety. If the provided plug does not
fit into your outlet, consult an electrician for replacement of the obsolete outlet.
7.) Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
8.) Only use attachments / accessories specified by the manufacturer.
9.) Unplug this apparatus during lightning storms or when unused for long periods of time.
10.) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
11.) This appliance shall not be exposed to dripping or splashing water and no object filled with liquids
such as vases shall be placed on the apparatus.
12.) Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid injury from tip-over.
13.) Do not overload wall outlet. Use only power source as indicated.
14.) Use replacement parts as specified by the manufacturer.
15.) The product may be mounted to a wall only if recommended by the manufacturer.
16.) Upon completion of any service or repairs to this product, ask the service technician to perform
safety checks.
!
Thank you for purchasing this SmartSet
Dual Alarm Clock Radio with Triple
®
Display plus Touchless Snooze and Display Control Features. We think you will be truly
amazed by all of the features that we have packed into this compact bedside companion.
First of all there is Emerson s patented SmartSet
Automatic Time Setting System. The
®
first time you connect this clock radio to your AC outlet it will immediately set itself to the

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CR-333 and is the answer not in the manual?

Questions and answers

Summary of Contents for LENCO CR-333

  • Page 1: Important Safety Instructions

    CR-333 OWNER S MANUAL Dual Alarm AM/FM Clock Radio with Triple Display, Touchless Snooze and Display Control SmartSet ® Automatic Time Setting System TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
  • Page 2: Important Notes

    correct year, month, date, day and time in your time Zone. If you live in a different time zone there is one simple Time Zone adjustment to make and you will never see the dreaded flashing 12:00 display again. It will automatically reset itself every time you have a power interruption, and not just the time but your wake-up times as well.
  • Page 3: Power Source

    or cleaning sprays may cause the rubber 'feet' to soften, and leave marks or a rubber residue on the furniture. To prevent any damage to your furniture we strongly recommend that you purchase small self-adhesive felt pads, available at hardware stores and home improvement centers everywhere, and apply these pads to the bottom of the rubber 'feet' before you place the product on fine wooden furniture.
  • Page 4 1.) ALARM 1 Time (Month/Date) Display. 2.) DIMMER (HIGH-LOW-OFF/WAVE) Selector Switch . 3.) ALARM 2 (RADIO/BUZZER/OFF) Selector Switch. 4.) ALARM 1 (RADIO/BUZZER/OFF) Selector Switch. 5.) Time Display. 6.) WAVE SENSOR. 7.) DAY OF WEEK (MON, TUE, WED, THU, FRI, SAT, SUN) Indicators. 8.) LOW BATT.
  • Page 5 Setting The Time, The First Time IMPORTANT: The first time you connect your new SmartSet clock radio to the ® AC outlet the internal computer will automatically set the time correctly for the area you live which is the initial default setting. The displays will scroll for a few seconds and then show the correct Year, Month, Date, Day and Time in your area.
  • Page 6 Daylight Saving and Leap Year Adjustments All Daylight Saving and Leap Year adjustments are made automatically by the SmartSet internal computer as follows: ® Start of Daylight Saving Time: At 1:59.59 AM on the last Sunday of daylight saving time, the clock will automatically advance to 3:00 AM.
  • Page 7: Listening To The Radio

    Selecting The Alarm Mode Your SmartSet clock radio allows you to select from among three different alarm ® operation modes for either alarm. The alarm modes are: Everyday the alarm will turn on all 7 days. Weekdays only the alarm will only turn on Monday through Friday; Weekends only the alarm will only turn on Saturday and Sunday;...
  • Page 8: Wake To Radio

    The FM antenna is built in to the AC power cord. If FM reception is weak try varying the position and direction of the power cord until you find the strongest signal. Wake To RADIO 1.) Turn the radio On and select the Band, Station, and Volume level that you wish to hear when the alarm comes on, then turn the radio Off again.
  • Page 9 Wake To BUZZER (Crescendo Alarm) NOTE: Alarm 1 and Alarm 2 have different buzzer sounds. Alarm 1 is a Single beep sound. Alarm 2 is a Double beep sound. You will be able to tell which alarm is going off by the sound that it makes. 1.) Reconfirm the wake up time and alarm mode settings for the alarm you are using, Alarm 1, Alarm 2, or both alarms.
  • Page 10: Display Brightness Control

    The Touchless Snooze Control works by detecting body heat. For best results your hand should be within 40 cm of the front right panel. SLEEP To Music Timer You can program the sleep timer to play the radio for up to 99 minutes and then shut off automatically.
  • Page 11: Changing The Lithium Battery

    is always at full brightness. The dimmer switch was set to the High position at our factory. when the dimmer switch is set to the LOW position the display brightness is reduced by approximately 50%. OFF/WAVE when the dimmer switch is set to the OFF/WAVE position the display goes Off completely.
  • Page 12 When the battery power drops below a certain level, the LOW BATT. indicator will Flash . When you see this indicator, you should change the battery as soon as it is convenient for you to do so. To change the battery proceed as follows: 1.) Purchase a replacement 3V lithium battery wherever batteries are sold.
  • Page 13: Lithium Battery Precautions

    If you notice that the time on your SmartSet clock radio is completely incorrect, ® and the DAY OF WEEK indicator is also wrong, press the CALENDAR button. If the small displays are showing 01.1 and 2005 , you probably experienced a total memory loss.

Table of Contents