AKG WMS 450 - SCHEMATIC Parts List
  1. Manuals
  2. Brands
  3. AKG Manuals
  4. Microphone system
  5. WMS 450 - SERVICE
  6. Parts list

AKG WMS 450 - SCHEMATIC Parts List

Multichannel system
Hide thumbs Also See for WMS 450 - SCHEMATIC:
Table of Contents

Advertisement

Quick Links

See also: Service Manual , Setup Manual
WMS 450
Multichannel System
Schematic & Part List
1-12 Channel
Wolfgang Fritz / Feb. 2008
MCS0802001
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WMS 450 - SCHEMATIC and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for AKG WMS 450 - SCHEMATIC

Summary of Contents for AKG WMS 450 - SCHEMATIC

  • Page 1 WMS 450 Multichannel System Schematic & Part List 1-12 Channel Wolfgang Fritz / Feb. 2008 MCS0802001...
  • Page 2 All the WMS450 Systems in this document are designed with active antennas that can used in all venues with a 20m RG58 antenna cable.

  • Page 3: Table Of Contents

    Content General Information Page Information Receiver/Antenna Placement Information Squelch Information Intermodulation Information Cable Attenuation Information PS4000 dip switch Information AB4000 dip switch Information PS4000 dip Switch Matrix Information Required Component Matrix Information Glossar WMS System Antenna Type Page 1 Channel SRA2 B/W Schematic / Part List Channel...

  • Page 4: Information

    Technical Information Wireless Basics Every wireless microphone system has to operate on one specific frequency Transmitter and receiver of a system need to work on the same frequency Two transmitters cannot be used with one receiver at the same time Receiver/Antenna Placement Direct line of sight between transmitter and receiver antenna Place the receiver/antennas at least 5 ft.
  • Page 5 RF-level settings that garantee to maximise operating distance even when using different cable lenghts and different types of cable! For this purpose, AKG’s PS4000W antenna splitter, has 3 dip switches that you’ll find on the right side of it’s front panel, behind the AKG logo.
  • Page 6 PS4000 dip switch matrix (RG58 cable) Passiv Antennas Active Antennas Antenna type & Gain ¼ wave Cable type RA4000 W SRA2 W RA4000 BW SRA2 BW UHF Antenna & 0 dB 1 dB 4-6 dB 18 dB 22-24 dB Length 0110E0189 0 dB -4 dB...
  • Page 7 WMS450/4000 Component Matrix Number of … ! only available in US ! Standard Power Supply Power Supply AC12 Power AC12 Power Receiver PS4000 ZAPD-21 MKPS PSU4000 Supply PSU01/4000 Supply HUB4000Q Additional you will need min. 2x antennas and 2x MKAxx antenna cables! Please, look at the "PS4000 dip switch matrix (RG58)"...
  • Page 8 Glossar ANT A IN ANT B IN SR4000 DATA SR4000 – WMS4000 Stationary Receiver DC IN (12V/0.5A) LOGIC OUT ¼“ TS AUDIO OUT AUDIO OUT ▼ Mixer ANT A IN ANT B IN PS4000W PS4000W – Power Splitter 1:4 (Distribute RF signal and DC Power) CASCADE B DC IN (12V/0.5A) CASCADE A...
  • Page 9 1 Channel WMS450 System With directional antennas & 40m antenna cable (132 feet) SRA2 B/W SRA2 B/W ANT OUT ANT OUT 2x MKA20 2x MKA20 (BNC I-connector is necessary to link cables!) (BNC I-connector is necessary to link cables!) BNC I-connector BNC I-connector Available e.g.
  • Page 10 12V AC-Adapter for 1 PS 4000, ASU4000, HUB 4000, HPA 4000 or SR 4000. 7801H000… AC 12 BNC I-connector EXTERNAL !! Not available at AKG - BNC I-Connector (you can buy it at www.rs-components.com, Ordernumber 112-1798) Optional Components (Charging System & Headphone Amplifier) units...

  • Page 11: Schematic / Part List

    1 Channel WMS450 System with omni-directional antennas & 25m antenna cable (82 feet) RA4000 B/W RA4000 B/W ANT OUT ANT OUT 1x MKA20 + 1x MKA5 1x MKA20 + 1x MKA5 (BNC I-connector is necessary to link cables!) (BNC I-connector is necessary to link cables!) BNC I-connector BNC I-connector Available e.g.
  • Page 12 12V AC-Adapter for 1 PS 4000, ASU4000, HUB 4000, HPA 4000 or SR 4000. 7801H000… AC 12 EXTERNAL !! Not available at AKG - BNC I-Connector BNC I-connector (you can buy it at www.rs-components.com, Ordernumber 112-1798) Optional Components (Charging System & Headphone Amplifier)

  • Page 13: Schematic / Part List

    2 Channel WMS450 System With directional antennas & 40m antenna cable (132 feet) SRA2 B/W SRA2 B/W ANT OUT ANT OUT 2x MKA20 2x MKA20 (BNC I-connector is necessary to link cables!) (BNC I-connector is necessary to link cables!) BNC I-connector BNC I-connector Available e.g.
  • Page 14 AC 12 passive power combiner (2in 1out) or Splitter (1in 2out) SERVSON76 ZAPD21 BNC I-connector EXTERNAL !! Not available at AKG - BNC I-Connector (you can buy it at www.rs-components.com, Ordernumber 112-1798) Optional Components (Charging System & Headphone Amplifier) units description...

  • Page 15: Schematic / Part List

    2 Channel WMS450 System with omni-directional antennas & 25m antenna cable (82 feet) RA4000 B/W RA4000 B/W ANT OUT ANT OUT 1x MKA20 + 1x MKA5 1x MKA20 + 1x MKA5 (BNC I-connector is necessary to link cables!) (BNC I-connector is necessary to link cables!) BNC I-connector BNC I-connector Available e.g.
  • Page 16 AC 12 passive power combiner (2in 1out) or Splitter (1in 2out) SERVSON76 ZAPD21 BNC I-connector EXTERNAL !! Not available at AKG - BNC I-Connector (you can buy it at www.rs-components.com, Ordernumber 112-1798) Optional Components (Charging System & Headphone Amplifier) units description...

  • Page 17: Schematic / Part List

    (DC power) 40m / 132 ft Version: 2x MKA20 BNC I-connector is necessary to link cables! MKA20 MKA20 Available e.g. www.rs-components.com, Ordernumber 112-1798 dip switches behind AKG Logo 2xMKA20 1xMKA20 (40m Cable) (20m Cable) -12dB -2dB down ANT A IN...
  • Page 18 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205 MKA 20 EXTERNAL !! Not available at AKG - BNC I-Connector BNC I-connector (you can buy it at www.rs-components.com, Ordernumber 112-1798) Optional Components (Charging System & Headphone Amplifier)

  • Page 19: Schematic / Part List

    (DC power) 40m / 132 ft Version: 2x MKA20 BNC I-connector is necessary to link cables! MKA20 MKA20 Available e.g. www.rs-components.com, Ordernumber 112-1798 dip switches behind AKG Logo 2xMKA20 1xMKA20 (20m Cable) (40m Cable) -8dB down ANT A IN ANT B IN...
  • Page 20 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205 MKA 20 EXTERNAL !! Not available at AKG - BNC I-Connector BNC I-connector (you can buy it at www.rs-components.com, Ordernumber 112-1798) Optional Components (Charging System & Headphone Amplifier)

  • Page 21: Schematic / Part List

    (DC power) 40m / 132 ft Version: 2x MKA20 BNC I-connector is necessary to link cables! MKA20 MKA20 Available e.g. www.rs-components.com, Ordernumber 112-1798 dip switches behind AKG Logo 2xMKA20 1xMKA20 (40m Cable) (20m Cable) -12dB -2dB down ANT A IN...
  • Page 22 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205 MKA 20 EXTERNAL !! Not available at AKG - BNC I-Connector BNC I-connector (you can buy it at www.rs-components.com, Ordernumber 112-1798) Optional Components (Charging System & Headphone Amplifier)

  • Page 23: Schematic / Part List

    (DC power) 40m / 132 ft Version: 2x MKA20 BNC I-connector is necessary to link cables! MKA20 MKA20 Available e.g. www.rs-components.com, Ordernumber 112-1798 dip switches behind AKG Logo 2xMKA20 1xMKA20 (20m Cable) (40m Cable) -8dB down ANT A IN ANT B IN...
  • Page 24 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205 MKA 20 EXTERNAL !! Not available at AKG - BNC I-Connector BNC I-connector (you can buy it at www.rs-components.com, Ordernumber 112-1798) Optional Components (Charging System & Headphone Amplifier)

  • Page 25: Schematic / Part List

    40m / 132 ft Version: 2x MKA20 BNC I-connector is necessary to link cables! MKA20 MKA20 Available e.g. www.rs-components.com, Ordernumber 112-1798 dip switches behind AKG Logo PSU4000 DC OUT 1 (2.5A) DC OUT 2 (2A) ~90-230V AC POWER DC OUT 3 (2A)
  • Page 26 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205 MKA 20 BNC I-connector EXTERNAL !! Not available at AKG - BNC I-Connector (you can buy it at www.rs-components.com, Ordernumber 112-1798) Optional Components (Charging System & Headphone Amplifier) units...

  • Page 27: Schematic / Part List

    40m / 132 ft Version: 2x MKA20 BNC I-connector is necessary to link cables! MKA20 MKA20 Available e.g. www.rs-components.com, Ordernumber 112-1798 dip switches behind AKG Logo PSU4000 DC OUT 1 (2.5A) DC OUT 2 (2A) ~90-230V AC POWER DC OUT 3 (2A)
  • Page 28 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205 MKA 20 BNC I-connector EXTERNAL !! Not available at AKG - BNC I-Connector (you can buy it at www.rs-components.com, Ordernumber 112-1798) Optional Components (Charging System & Headphone Amplifier) units...

  • Page 29: Schematic / Part List

    40m / 132 ft Version: 2x MKA20 BNC I-connector is necessary to link cables! MKA20 MKA20 Available e.g. www.rs-components.com, Ordernumber 112-1798 dip switches behind AKG Logo PSU4000 DC OUT 1 (2.5A) DC OUT 2 (2A) ~90-230V AC POWER DC OUT 3 (2A)
  • Page 30 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205 MKA 20 BNC I-connector EXTERNAL !! Not available at AKG - BNC I-Connector (you can buy it at www.rs-components.com, Ordernumber 112-1798) Optional Components (Charging System & Headphone Amplifier) units...

  • Page 31: Schematic / Part List

    40m / 132 ft Version: 2x MKA20 BNC I-connector is necessary to link cables! MKA20 MKA20 Available e.g. www.rs-components.com, Ordernumber 112-1798 dip switches behind AKG Logo PSU4000 DC OUT 1 (2.5A) DC OUT 2 (2A) ~90-230V AC POWER DC OUT 3 (2A)
  • Page 32 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205 MKA 20 BNC I-connector EXTERNAL !! Not available at AKG - BNC I-Connector (you can buy it at www.rs-components.com, Ordernumber 112-1798) Optional Components (Charging System & Headphone Amplifier) units...

  • Page 33: Schematic / Part List

    40m / 132 ft Version: 2x MKA20 BNC I-connector is necessary to link cables! MKA20 MKA20 Available e.g. www.rs-components.com, Ordernumber 112-1798 dip switches behind AKG Logo PSU4000 DC OUT 1 (2.5A) DC OUT 2 (2A) ~90-230V AC POWER DC OUT 3 (2A)
  • Page 34 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205 MKA 20 BNC I-connector EXTERNAL !! Not available at AKG - BNC I-Connector (you can buy it at www.rs-components.com, Ordernumber 112-1798) Optional Components (Charging System & Headphone Amplifier) units...

  • Page 35: Schematic / Part List

    40m / 132 ft Version: 2x MKA20 BNC I-connector is necessary to link cables! MKA20 MKA20 Available e.g. www.rs-components.com, Ordernumber 112-1798 dip switches behind AKG Logo PSU4000 DC OUT 1 (2.5A) DC OUT 2 (2A) ~90-230V AC POWER DC OUT 3 (2A)
  • Page 36 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205 BNC I-connector EXTERNAL !! Not available at AKG - BNC I-Connector (you can buy it at www.rs-components.com, Ordernumber 112-1798) Optional Components (Charging System & Headphone Amplifier)

  • Page 37: Schematic / Part List

    40m / 132 ft Version: 2x MKA20 BNC I-connector is necessary to link cables! MKA20 MKA20 Available e.g. www.rs-components.com, Ordernumber 112-1798 dip switches behind AKG Logo PSU4000 DC OUT 1 (2.5A) DC OUT 2 (2A) ~90-230V AC POWER DC OUT 3 (2A)
  • Page 38 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205 MKA 20 BNC I-connector EXTERNAL !! Not available at AKG - BNC I-Connector (you can buy it at www.rs-components.com, Ordernumber 112-1798) Optional Components (Charging System & Headphone Amplifier) units...

  • Page 39: Schematic / Part List

    40m / 132 ft Version: 2x MKA20 BNC I-connector is necessary to link cables! MKA20 MKA20 Available e.g. www.rs-components.com, Ordernumber 112-1798 dip switches behind AKG Logo PSU4000 DC OUT 1 (2.5A) DC OUT 2 (2A) ~90-230V AC POWER DC OUT 3 (2A)
  • Page 40 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205 MKA 20 BNC I-connector EXTERNAL !! Not available at AKG - BNC I-Connector (you can buy it at www.rs-components.com, Ordernumber 112-1798) Optional Components (Charging System & Headphone Amplifier) units...

  • Page 41: Schematic / Part List

    40m / 132 ft Version: 2x MKA20 BNC I-connector is necessary to link cables! MKA20 MKA20 Available e.g. www.rs-components.com, Ordernumber 112-1798 dip switches behind AKG Logo PSU4000 DC OUT 1 (2.5A) DC OUT 2 (2A) ~90-230V AC POWER DC OUT 3 (2A)
  • Page 42 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205 MKA 20 BNC I-connector EXTERNAL !! Not available at AKG - BNC I-Connector (you can buy it at www.rs-components.com, Ordernumber 112-1798) Optional Components (Charging System & Headphone Amplifier) units...

  • Page 43: Schematic / Part List

    40m / 132 ft Version: 2x MKA20 BNC I-connector is necessary to link cables! MKA20 MKA20 Available e.g. www.rs-components.com, Ordernumber 112-1798 dip switches behind AKG Logo PSU4000 DC OUT 1 (2.5A) DC OUT 2 (2A) ~90-230V AC POWER DC OUT 3 (2A)
  • Page 44 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205 MKA 20 BNC I-connector EXTERNAL !! Not available at AKG - BNC I-Connector (you can buy it at www.rs-components.com, Ordernumber 112-1798) Optional Components (Charging System & Headphone Amplifier) units...

  • Page 45: Schematic / Part List

    40m / 132 ft Version: 2x MKA20 BNC I-connector is necessary to link cables! MKA20 MKA20 Available e.g. www.rs-components.com, Ordernumber 112-1798 dip switches behind AKG Logo PSU4000 DC OUT 1 (2.5A) DC OUT 2 (2A) ~90-230V AC POWER DC OUT 3 (2A)
  • Page 46 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205 BNC I-connector EXTERNAL !! Not available at AKG - BNC I-Connector (you can buy it at www.rs-components.com, Ordernumber 112-1798) Optional Components (Charging System & Headphone Amplifier)

  • Page 47: Schematic / Part List

    40m / 132 ft Version: 2x MKA20 BNC I-connector is necessary to link cables! MKA20 MKA20 Available e.g. www.rs-components.com, Ordernumber 112-1798 dip switches behind AKG Logo PSU4000 DC OUT 1 (2.5A) DC OUT 2 (2A) ~90-230V AC POWER DC OUT 3 (2A)
  • Page 48 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205 BNC I-connector EXTERNAL !! Not available at AKG - BNC I-Connector (you can buy it at www.rs-components.com, Ordernumber 112-1798) Optional Components (Charging System & Headphone Amplifier)

  • Page 49: Schematic / Part List

    40m / 132 ft Version: 2x MKA20 BNC I-connector is necessary to link cables! MKA20 MKA20 Available e.g. www.rs-components.com, Ordernumber 112-1798 dip switches behind AKG Logo PSU4000 DC OUT 1 (2.5A) DC OUT 2 (2A) ~90-230V AC POWER DC OUT 3 (2A)
  • Page 50 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205 BNC I-connector EXTERNAL !! Not available at AKG - BNC I-Connector (you can buy it at www.rs-components.com, Ordernumber 112-1798) Optional Components (Charging System & Headphone Amplifier)

  • Page 51: Schematic / Part List

    40m / 132 ft Version: 2x MKA20 BNC I-connector is necessary to link cables! MKA20 MKA20 Available e.g. www.rs-components.com, Ordernumber 112-1798 dip switches behind AKG Logo PSU4000 DC OUT 1 (2.5A) DC OUT 2 (2A) ~90-230V AC POWER DC OUT 3 (2A)
  • Page 52 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205 MKA 20 BNC I-connector EXTERNAL !! Not available at AKG - BNC I-Connector (you can buy it at www.rs-components.com, Ordernumber 112-1798) Optional Components (Charging System & Headphone Amplifier) units...

Table of Contents