Page 1
Perception wireless BEDIENUNGSANLEITUNG ....... 2 Bitte vor Inbetriebnahme des Gerätes lesen! USER INSTRUCTIONS ......18 Please read the manual before using the equipement! MODE D’EMPLOI ......... 34 Veuillez lire cette notice avant d’utiliser le système! ISTRUZIONI PER L’USO......50 Prima di utilizzare l’apparecchio, leggere il manuale! MODO DE EMPLEO ......
• Only use the equipment for the applications described in this manual. AKG cannot accept any liability for damages resulting from improper handling or misuse.
Check that the packaging contains all of the items listed for your system. If anything is missing, please contact your AKG dealer. Optional Accessories For optional accessories, refer to the current AKG catalog or folder, or visit www.akg.com. Your dealer will be glad to help. Perception wireless...
Description SR 45 receiver The SR 45 is a stationary receiver for use with all transmitters of the Perception wireless system. The SR 45 operates within a switching bandwidth of up to 30 MHz in the 500 to 865 MHz UHF carrier frequency range and offers up to 8 selectable carrier frequencies.
Description Rear panel Figure 2: Rear panel controls on SR 45 receiver 1 Carrier frequency label: A label indicating the carrier frequency range and up to 8 carrier frequencies is affixed to the rear panel of the receiver. 2 SQUELCH: The automatic squelch circuit switches the receiver off if the received signal is too weak, in order to suppress the interference noise or background noise of the receiver while the transmitter is off.
Description HT 45 handheld transmitter The HT 45 handheld transmitter operates within a switching bandwidth of up to 30 MHz in the 500 to 865 MHz UHF carrier frequency range and offers up to 8 selectable carrier frequencies. The transmitter uses an antenna integrated within the housing. The microphone capsule in the transmitter has a cardioid pickup pattern.
OFF: Power to the transmitter is off. 2 Audio input: 3-pin mini XLR connector with both mic and line level pins that automatically match the connector pinout of the recommended AKG microphones or optional MKG L guitar cable. 3 Antenna: Permanently connected, flexible antenna.
• CK 55 L, C 417 L, C 520 L, C 555 L, C 544 L, C 577 • C 516 ML, C 518 ML, C 519 ML, C 411 • The MKG L guitar cable from AKG lets you connect an electric guitar, electric bass or keytar to the bodypack transmitter.
Setting up 3 Setting up • Before setting up your Perception wireless, check that the transmitter and receiver are tuned to the same frequency. The wireless connection will not work if the receiver and transmitter are tuned to different frequencies. •...
The PT 45 bodypack transmitter has been designed for use with the CK 55 L, C 411, C 417 L, C 520 L, C 555 L, C 516 ML, C 518 ML and C 519 ML microphones from AKG. If you wish to...
Setting up Connecting an instrument Remove the battery compartment cover. Plug the jack plug on the MKG L guitar cable into the output jack of your instrument and the mini XLR connector on the guitar cable into the audio input socket of the bodypack transmitter.
Microphone technique 4 Microphone technique HT 45 handheld transmitter A handheld vocal microphone provides many ways of shaping the sound of your voice as it is heard over the sound system. The following sections contain useful hints on how to use your HT 45 handheld transmitter for best results.
Microphone technique PT 45 bodypack transmitter CK 55 L lavalier microphone Fix the microphone to the supplied lavalier clip or to the optional H 41/1 tiepin. Clip the microphone onto the speaker's clothing, as close as possible to his or her mouth.
Cleaning 5 Cleaning Surfaces • Use a soft cloth moistened with water to clean the surfaces. Unscrew and remove the wire-mesh cap of the handheld transmitter. Internal windshield of handheld transmitter Take the windshield (foam insert) out of the wire-mesh cap. Wash the windshield in mild soap suds.
Troubleshooting 6 Troubleshooting Problem Problem Possible cause Possible cause Remedy Remedy Problem Problem Possible cause Possible cause Remedy Remedy AC adapter is not connected to receiver Connect AC adapter to receiver and/or power and/or power outlet. outlet. Receiver is OFF. Push ON/OFF switch to switch receiver ON.
200 x 190 x 44 mm Net weight 214 g 60 g 360 g This product conforms to the standards listed in the Declaration of Conformity. To order a free copy of the Declaration of Conformity, visit http://www.akg.com or contact sales@akg.com. Perception wireless...