Page 1
EN User Manual | Washing Machine LR7E60488 aeg.com\register...
Page 2
Welcome to AEG! Thank you for choosing our appliance. In our drive to be sustainable, we are reducing paper assets and provide full user manuals online. Access your full user manual at aeg.com/manuals Get usage advice, brochures, trouble shooter, service and repair information at aeg.com/support...
Page 3
• If the appliance has a child safety device, it should be activated. • Children shall not carry out cleaning and user maintenance of the appliance without supervision. 1.2 General Safety • This appliance is for washing domestic-type, machine- washable laundry only. •...
Page 4
• If a tumble dryer is stacked on the top of the washing machine, make sure to use the correct stacking kit approved by AEG (see more details in chapter "Accessories - Stacking kit"). 2. SAFETY INSTRUCTIONS 2.1 Installation...
Page 5
• Before connection to new pipes, pipes not consequences and might void the used for a long time, where repair work guarantee. has been carried out or new devices fitted • The following spare parts will be available (water meters, etc.), let the water flow until for 10 years after the model has been it is clean and clear.
Page 6
• The AEG Steam Fragrance, thanks to the PODS®, equipped with a system able to steam programmes offers the perfect spread and mixing the detergent in an...
Page 7
Transit bolts Hose support The rating plate reports the model name (A), product number (B), electrical ratings (C) and serial number (D). Mod. xxxxxxxxx 910000000 00 Prod.No. 000V ~ 00Hz 0000 W 00000000 4. TECHNICAL DATA Dimension Width/ Height/ Total depth 59,6 cm /84,7 cm /60,2 cm Electrical connection Voltage...
Page 8
5. Put the plastic caps, that you find in the CAUTION! user manual bag, in the holes. Do not lay washing machine on its front. 3. Put the appliance back into an upright position. Remove the power supply cable and the drain hose from the hose holders. 5.2 Positioning and levelling 1.
Page 9
2. Connect the water inlet hose to the back of the appliance. 3. Position it toward left or right depending A correct adjustment of the appliance on the position of the water tap. level prevents the vibration, noise and the movement of the appliance when in operation.
Page 10
5.4 Water-stop device If this occurs, close the water tap and contact the authorized service centre to replace the The inlet hose has a water stop device. This hose. device prevents water leaks in the hose because of its natural ageing. 5.5 Water drainage The red sector in the window «A»...
Page 11
Read carefully the instructions supplied with correct stacking kit. the accessory. Only appropriate accessories approved by AEG ensure the safety standards of the appliance. If unapproved parts are used, any claims will be invalidated. 6.2 Fixing plate kit If you install the appliance on a plinth that is not an accessory supplied by AEG, secure the appliance in the fixing plates.
Page 12
WARNING! Do not put the tumble dryer under the washing machine. Verify the compatible stacking kit by checking the depth of your appliances. 7. CONTROL PANEL 7.1 Control panel description 11 10 Programme dial Flecken/Vorwäsche skipping touch button Display Pods® touch button Zeit Sparen touch button Plus Dampf touch button Zeitvorwahl touch button...
Page 13
7.2 Display Door locked indicator. Washing phase indicator. It flashes during prewash and wash phase. Rinsing phase indicator. It flashes during rinse phase. indicator appears, when the Extra rinse option is activated Spinning and draining phase indicator. It flashes during spin and drain phase. Anti-crease phase indicator.
Page 14
Extra silent indicator. Rinse hold indicator. The spin area: Spin speed indicator No Spin indicator. Spin phase is off. Pre-wash indicator. Stain indicator. Child safety lock indicator. 8. DIAL AND BUTTONS 8.1 Ein/Aus When the display shows the indicators Pressing this button for a few seconds allows , the appliance does not heat the to activate or deactivate the appliance.
Page 15
• Activate the Extra Silent option. The intermediate and the final spinning phases are suppressed and the The options can increase the programme programme ends with water in the drum. duration. This helps to reduce creasing. The display shows the indicator .
Page 16
• pressing the Ein/Aus button for a few 8.10 Zeitvorwahl seconds to activate or deactivate the With this option you can delay the start of a appliance; programme in a more convenient time. • turning the selector knob to another position.
Page 17
Programme Programme description Cotton and synthetic items lightly soiled or worn only once. 20 Min. - 3 kg Cotton, synthetic and mixed items. Special steam cycle without washing that can be Dampf used to prepare your dried laundry for ironing or refreshing garments worn once. This programme reduces creases, odours and relaxes the fibres.
Page 18
Programme temperature, maximum spin speed and maximum load Default tempera‐ Maximum load ture Reference spin speed Programme Temperature Spin speed range range 30 °C 1400 rpm MixLoad 69min 5 kg 60 °C - 30 °C 1400 rpm - 400 rpm Eco 40-60 1400 rpm 8 kg...
Page 20
• Items with label "Dry clean only". compounds which are not compatible with Do not use any detergent! The Dampf programmes do not remove The fragrance is available on AEG web particularly intense odour and do not shop or by authorised dealer. perform any hygienic cycle.
Page 21
9.3 Woolmark Wool Care - Blue The wool wash cycle of this machine has been approved by The Woolmark Company for the washing of wool gar‐ ments labelled as «hand wash» provided that the prod‐ ucts are washed according to the instructions on the gar‐ ment label and those issued by the manufacturer of this washing machine.
Page 22
hundreds) for 2 seconds and 76 (tens and 3. Press and hold the Schleudern units). Plus Dampf buttons for some seconds (within 10 seconds after the switching on. After these 10 seconds, the key If the procedure does not work (due to combination activates and deactivates the timeout, wrong programme dial position acoustic signals).
Page 23
- Compartment for washing phase (powder detergent only). Make sure that the Pods® option is de‐ activated when using this compartment. If using liquid detergent, remember to insert the container for liquid detergent CAUTION! Make sure that no laundry stays between - Compartment for fabric softener and other liq‐...
Page 24
b) Pour the liquid detergent in the same 4. Pour fabric softener in the compartment compartment after inserting the relevant container 5. Close the detergent dispenser. 12.4 Setting a programme 1. Turn the programme dial to select the desired washing programme. The related programme indicator comes on.
Page 25
the indicator flashes, the ProSense System starts the laundry load detection: The ProSense estimation starts at the end of the countdown. 1. The appliance detects the load in the first 30 seconds, the indicator flashes. the Cancelling the delay start after the digit area shows and the drum countdown has started...
Page 26
12.8 Programme phase indicators When the programme starts the indicator of If the ProSense phase is already carried the running phase flashes and the other out and the water filling is already phase indicators are steady on. started, the new programme starts without repeating the ProSense phase.
Page 27
12.12 End of the programme 2. Touch the Start/Pause button: • If you have set , the appliance When the programme has finished, the drains the water and spins. appliance stops automatically. The acoustic signals operate (if they are active). •...
Page 28
13. HINTS AND TIPS WARNING! Refer to Safety chapters. 13.1 The laundry load • Divide the laundry into: white, coloured, synthetics, delicates and wool. • Follow the washing instructions on the laundry care labels. • Empty pockets and unfold the items. •...
Page 29
max) for all types of fabric, or special • Normally soiled laundry may be washed ones for woollens only. without prewash in order to save • The choice and quantity of detergent will detergent, water and time (the depend on: type of fabric (delicates, environment is protected too!).
Page 30
cycle with empty drum and a descaling product occasionally. Clean the inlet hose and Twice a year the valve filter The following paragraphs explain how you Always follow the instructions that you should clean each part. find on the packaging of the product. 14.2 Removing foreign objects 14.5 Maintenance wash With the low temperature programmes it is...
Page 31
Rust deposits in the drum may occur due to 2. Remove the container for liquid rusting foreign body in the washing or tap detergent, if inserted. water containing iron Clean the drum with special products for stainless steel. Always follow the instructions that you find on the packaging of the product.
Page 32
CAUTION! Press the bottom cover as indicated in the picture. Make sure that it is closed properly. CLICK 6. Turn the dispenser up side down and open the bottom cover as indicated in the picture. 9. Reassembly the drawer as follows: a.
Page 33
4. Turn the filter 180 degrees in anti- clockwise direction to open it, without removing. Let the water flow out. Regularly check the drain pump filter and make sure that it is clean. Clean the drain pump if: • The appliance does not drain the water. 180˚...
Page 34
11. Put the filter back into the special guides 2. Remove the inlet hose from the appliance by turning it clockwise. Make sure that by loosening the ring nut. you tighten the filter correctly to prevent leakages. 3. Clean the valve filter on the back of the appliance with a toothbrush.
Page 35
0° C or drop below, remove the remaining water from the inlet hose and the drain pump. 1. Disconnect the mains plug from the mains socket. 2. Close the water tap. 3. Put the two ends of the inlet hose in a container and let the water flow out of the hose.
Page 36
• Make sure that the water tap is open. • Make sure that the pressure of the water supply is not too low. For this infor‐ The appliance does not fill mation, contact your local water authority. with water properly. •...
Page 37
Problem Possible solution • Make sure that the couplings of the water hoses are tight and there is not wa‐ ter leakages. There is water on the floor. • Make sure that the water inlet hose and the drain hose have no damages. •...
Page 38
16. CONSUMPTION VALUES 16.1 Introduction See the web link www.theenergylabel.eu for detailed information about Energy Label. The QR code on the energy label supplied with the appliance provides a web link to the information related to the performance of the appliance in the EU EPREL database. Keep the energy label for reference together with the user manual and all other documents provided with this appliance.
Page 39
Power consumption in different modes Off (W) Stand-by (W) Delay start (W) 0.50 0.50 4.00 Time to Off/Standby mode is 15 minutes maximum. 16.4 Common programmes These values are indicative only. Programme rpm 1) Litres hh:mm °C Baumwolle 2.750 100.0 03:30 52.00 85.0...
Page 40
Connect the mains plug to the mains socket. 2. Set the desired options by means of the corresponding touch buttons. To start the Open the water tap. programme, touch the Start/Pause Load the laundry. button. 3. The appliance starts. Pour the detergent and other treatment in the At the end of the programme, remove the proper compartment of the detergent laundry.
Page 41
Programmes Load Product description White cotton items. This program removes more than 99,99% of bacteria 8 kg Hygiene and viruses . It also ensure a proper reduction of allergens. Washing programme. Washing programme and waterproofing phase. Tested for Staphylococcus aureus, Enterococcus faecium, Candida albicans, Pseudomonas aeruginosa and MS2 Bacteriophage in external test performed by Swissatest Testmaterialien AG in 2021 (Test Report No.
Need help?
Do you have a question about the LR7E60488 and is the answer not in the manual?
Questions and answers