18. ENVIRONMENTAL CONCERNS..............40 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
ENGLISH SAFETY INFORMATION Before beginning the installation and use of this appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
1.2 General Safety This appliance is for washing domestic-type, machine- • washable laundry only. This appliance is designed for single household • domestic use in an indoor environment. This appliance may be used in, offices, hotel guest • rooms, bed & breakfast guest rooms, farm guest houses and other similar accommodation where such use does not exceed (average) domestic usage levels.
ENGLISH approved by AEG (see more details in chapter "Accessories - Stacking kit"). 2. SAFETY INSTRUCTIONS 2.1 Installation 2.2 Electrical connection The installation must comply WARNING! with relevant national Risk of fire and electric regulations. shock. • Remove all the packaging and the •...
Page 6
• Do not use an extension hose if the has been discontinued: motor and inlet hose is too short. Contact the motor brushes, transmission between Authorised Service Centre for the motor and drum, pumps, shock replacement of the inlet hose.
• The steam has a quick and easy way that is not an accessory supplied by to refresh the clothes. The gentle AEG, secure the appliance in the fixing steam programmes remove odours plates. and reduce creases in dry fabrics so Read carefully the instructions supplied they need little ironing.
The rating plate reports the model name (A), product number (B), electrical ratings (C) and serial number (D). Mod. xxxxxxxxx Prod.No. 910000000 00 000V ~ 00Hz 0000 W 00000000 4. TECHNICAL DATA Dimension Width/ Height/ Total depth 59,6 cm /84,7 cm /60,2 cm...
ENGLISH CAUTION! Do not lay washing machine on its front. 3. Put the appliance back into an upright position. Remove the power supply cable and the drain hose from the hose holders. 5.2 Positioning and levelling 1. Install the appliance on a flat hard floor.
When the appliance is installed on a plinth or a tumble dryer is stacked on the washing machine, use the accessories described in chapter 'Accessories'. Read carefully the instructions supplied with the appliance and with the accessory. WARNING! The inlet water shall not exceed 25 °C.
Page 11
ENGLISH You can extend the drain hose to maximum 400 cm. Contact the authorized service centre for the other drain hose and the extension. It is possible to connect the drain hose in different ways: 1. Make a U shape with the drain hose and put it around the plastic hose guide.
Read carefully the instructions supplied with the accessory. Only appropriate accessories approved by AEG ensure the safety standards of the appliance. If unapproved parts are used, any claims will be invalidated. 6.2 Stacking kit The tumble dryer can be stacked on the...
Rinsing phase indicator. It flashes during rinse phase. Spinning and draining phase indicator. It flashes during spin and drain phase. Anti-crease phase indicator. Read the paragraph Plus Steam for more details. Steam phase indicator. The digital indicator can show: •...
ENGLISH 8. DIAL AND BUTTONS 8.1 On/Off When the display shows the indicators , the appliance does not heat Pressing this button for a few seconds the water. allows to activate or deactivate the appliance. Two different tunes sound 8.4 Spin while switching the appliance on or off.
8.6 Option The display shows the indicator The door stays locked. The drum With this button you can select one of the turns regularly to reduce creasing. following options: You must drain the water to unlock • Skipping wash phase - Rinse Only the door.
ENGLISH 8.10 Delay Start unlocks. User at any moment can terminate the anticrease phase by: With this option you can delay the start of • pressing the On/Off button for a few a programme in a more convenient time. seconds to activate or deactivate the Touch the button repeatedly to set the appliance;...
Page 18
Programme Programme description Cotton, synthetic and mixed items. Special steam cycle without Steam washing that can be used to prepare your dried laundry for ironing or refreshing garments worn once. This programme reduces crea‐ ses, odours and relaxes the fibres. Do not use any detergent.
Page 19
ENGLISH Default tempera‐ Maximum load Reference spin ture Programme speed Temperature Spin speed range range 30 °C 1200 rpm Delicates 2 kg 40 °C - Cold 1200 rpm - 400 rpm 40 °C 1200 rpm Wool 1,5 kg 40 °C - Cold 1200 rpm - 400 rpm 30 °C 1200 rpm...
Page 20
Steam programmes can be used for reducing wrinkles and odours of -- = Not recommended garments that just need to be refreshed, avoiding washing. Steam programme 9.2 Steam programme doesn't remove particularly intense with AEG Steam Fragrance odour. Available in www.aeg.com/shop .
Hang items out for a few minutes. The fragrance dose bottles are available on AEG web The fragrance. If you use this special shop or by authorised gentle fragrance, your laundry will scent dealer.
10.3 Operating Hours 10.4 Factory Reset Counter This function allows to restore the factory default options. To activate this option It is possible to visualise the total follow steps below: operating time of the appliance in hours, starting from the first switching on. This 1.
ENGLISH programme. The relevant indicator CAUTION! illuminates. Make sure that no laundry The display shows the maximum load, stays between the seal and the default temperature, the default spin the door. There is a risk of speed, the indicators of the phases water leakage or damage to making up the programme and the cycle the laundry.
After a washing cycle, if necessary, remove any detergent residue from the detergent dispenser. 12.4 Check the position of the • Do not exceed to liquid detergent dose indicated on the flap. detergent flap • Do not set the prewash phase.
ENGLISH 12.6 Starting a programme 12.8 The ProSense with the delay start Technology load detection 1. Touch this repeatedly until the The programme duration in display shows the desired delay time. the display is referred to a medium/high load. The indicator comes on.
Now, you can set a new washing The ProSense Technology is programme. not available with some programmes, such as Wool, If the ProSense phase is programmes with short already carried out and the cycles and without washing water filling is already phase.
ENGLISH option and than press Start/Pause • The door stays locked. button. • You must drain the water to open the door: 12.13 End of the programme 1. If necessary, touch the Spin button to decrease the spin speed proposed When the programme has finished, the by the appliance.
13. HINTS AND TIPS WARNING! Refer to Safety chapters. 13.1 The laundry load • Divide the laundry into: white, coloured, synthetics, delicates and wool. • Follow the washing instructions on the • Empty pockets and unfold the items. laundry care labels.
ENGLISH • The choice and quantity of detergent save detergent, water and time (the will depend on: type of fabric environment is protected too!). (delicates, woollens, cottons, etc), the • Loading the appliance to the colour of clothes, size of the load, maximum capacity indicated for degree of soiling, wash temperature each programmes helps to reduce...
14.4 Descaling Clean drum Every two months If the water hardness in your Clean detergent dis‐ Every two months area is high or moderate, we recommend that you use a penser water descaling product for Clean drain pump Twice a year washing machines.
ENGLISH Clean it when needed, using ammonia 1. Open the drawer. Press the catch cream cleanser agent without scratching downwards as indicated in the the seal surface. picture and pull it out. Always obey the instructions that you find on the packaging of the product.
2. Place a suitable bowl below the drain 14.9 Cleaning the drain pump pump access to collect the water that flows out. WARNING! 3. Open the chute downwards. Always Disconnect the mains plug keep a rag nearby to dry up any from the mains socket.
ENGLISH 8. If it is necessary, remove fluff and 12. Close the pump cover. objects from the filter recess. 9. Make sure that the impeller of the pump can rotate. If it does not rotate, contact the Authorised Service Centre. 14.10 Cleaning the inlet hose and the valve filter It is recommended to clean both the...
14.11 Emergency drain If the appliance cannot drain the water, carry out the same procedure, described in 'Cleaning the drain pump' paragraph. If necessary, clean the pump. 14.12 Frost precautions If the appliance is installed in an area where the temperature can reach the values around 0°...
Page 35
ENGLISH 15.1 Alarm Codes and Possible failures The appliance does not start or it stops during operation. First try to find a solution to the problem (refer to the tables). WARNING! Deactivate the appliance before carrying out any check. With some problems, the display shows an alarm code and the Start/Pause button may flash continuously: Problem Possible solution...
Page 36
If the display shows other alarm codes, deactivate and activate the appliance. If the problem continues, contact the Authorised Service Centre. In case of different problem with the washing machine check the table below for possible solutions. Problem Possible solution •...
ENGLISH Problem Possible solution • Increase the detergent quantity or use a different detergent. • Use special products to remove the stubborn stains before The washing results you wash the laundry. are not satisfactory. • Make sure that you set the correct temperature. •...
Page 38
Remaining moisture at the end of spinning phase. The higher is the spin speed, the higher is the noise and the lower is the remaining moisture. Values and programme duration may differ depending on different conditions (e.g. room temperature, water temperature and pressure, load size and type of laundry, supply voltage) and also if you change the default setting of a programme.
Clean the filter regularly and, especially, if the alarm code appears on the display. 17.3 Programmes Programmes Load Product description MixLoad 69min Cotton and synthetic items. This programme ensures a 5 kg good washing performance in a short time.
Need help?
Do you have a question about the LR722K86O and is the answer not in the manual?
Questions and answers