Download Print this page
Xiaomi MI Wi-Fi Range Extender Pro User Manual
Xiaomi MI Wi-Fi Range Extender Pro User Manual

Xiaomi MI Wi-Fi Range Extender Pro User Manual

Hide thumbs Also See for MI Wi-Fi Range Extender Pro:

Advertisement

Quick Links

Mi Wi-Fi Range Extender
Pro

Advertisement

loading
Need help?

Need help?

Do you have a question about the MI Wi-Fi Range Extender Pro and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Xiaomi MI Wi-Fi Range Extender Pro

  • Page 1 Mi Wi-Fi Range Extender...
  • Page 2 About Product : The Mi Wi-Fi Range Extender Pro is designed to extend the range of your home Wi-Fi network. Indicator: - Glows blue (all good) - Flashing blue (updating in progress) - Glows yellow (starting)
  • Page 3 - Flashing yellow (waiting for initialization) - Flashing red (hardware error) Reset button: - Press and hold for at least 5 seconds to restore the factory settings. Installation: 1. Place the amplifier where you need to amplify the signal. Connect it to a power source and wait for the yellow indicator to flash.
  • Page 4 2. Scan the QR code and download the Mi Home / Xiaomi Home app and follow the instructions in the app to configure the settings and manage the device. 3. The blue indicator will remain lit after the instrument is set.
  • Page 5 What should I do if my internet speed drops after connecting the Mi Wi-Fi Range Extender Pro? If the internet speed slows down after you connect the signal booster, there may be interference on the network.
  • Page 6 1. If the signal is weak, move the amplifier to another location where there are no major obstacles between the amplifier and the router. 2. If the signal booster is off-line, make sure the router is transmitting a Wi-Fi signal. If the router works normally, restart the booster and try again.
  • Page 7 MT7628K 580 MHz 2 MB 8 MB Antenna Type 2 external antennas Wireless Standards IEEE 802.11b/g/n Signal Rate 2.4 GHz, up to 300 Mbps Wireless Security WPA-PSK/ WPA2-PSK encryption Power Supply 100-240 V/0.35 A Operating 0-40°C temperature Operating humidity 10%-90%RH (non-condensing) Storage temperature -40-70°C Storage humidity...

This manual is also suitable for:

R03
Save PDF