Page 3
*1) XQ1; XQ4; XQ6; *2) EN IEC 55014-2:2021; EN IEC 61000-3-2:2019+A1; EN IEC 55014-1:2021; EN 61000-3-3:2013+A1+A2; EN 61000-3-11:2019; EN 62841-1:2015+A11; EN 62841-2-10:2017 *3) 2014/30/EU, 2006/42 EG, 2011/65/EU Gaimersheim, 2024-07-18 Alexander Essing *4) Collomix GmbH, Abt. Technische Entwicklung, Daimlerstr. 9, 85080 Gaimersheim, Deutschland...
Page 8
Technical data Rated power/Current consump� on: 1100 W 1500 W 1750 W Power supply: 110 volts AC 110 volts AC 110 volts AC Frequency: 50 Hz 50 Hz 50 Hz No-load speed: 0 - 940 min Rpm under load: 0 - 620 min Controlled load speed: 400 min or 550 min...
Page 9
► Do not wind cables or leads around any parts of your Machine-specifi c safety instruc� ons body. ► Do not use the machine with a damaged cable. Do not touch the cable and pull out the power plug im- : Read all safety warnings, instruc- WARNING mediately.
Page 10
EN Proper use When the machine is connected to the mains voltage, The machine is designed for mixing liquid and powder- the last selected speed setting appears on the display (3). based building products such as paints, mortar, adhesives, plaster and similar substances. Use the right Always hold the machine with both hands.
Page 11
Collomix Service center. Collomix GmbH To avoid safety hazards, all repairs, in par� cular the Daimlerstrasse 9 replacement of the mains connec� on cable, must only be 85080 Gaimersheim Germany carried out by an approved workshop or by your Collomix www.collomix.com Service!
Need help?
Do you have a question about the XQ1 and is the answer not in the manual?
Questions and answers