Pioneer PD-X88 Operating Instructions Manual

MASTER
COMPACT DISC PLAYER
COMPACT-DISC-SPIELER
PD-Xss
ose
DIGITAL AUDIO
Operating Instructions
Bedienungsanleitung
hiclelelemeM eee
Istruzioni per l'uso
SMONCER =
Thank you for buying this Pioneer product
Please read through these operating instructions so you will
know how to operate your model properly. After you have
finished reading the instructions, put them away in a safe
place for tuture reference.
in some countries or regions, the shape of the power-plug
and power outlet may sometimes differ from that shown in
the explanatory drawings. However, the method of con-
necting and operating the unit is the same.
LINE VOLTAGE SELECTOR SWITCH
Only multi-voltage models are provided with this switch.
U.S., Canadian, European, U.K., and Australian models
are not provided with this switch.
The line voltage selector switch is located on the rear panel
of this player. Before your player is shipped from the
factory, the switch is set to the power requirements of the
WARNING: 1o prevent FIRE OR SHOCK HAZARD,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
IMPORTANT NOTICE
[For U.S. and Canadian models]
The serial number for this equipment is located on the rear
panel. Please write this serial number on your enclosed war-
ranty card and keep it in a secure area. This is for your
security,
[For Canadian model]
CAUTION: to prevent ELECTRIC SHOCK DO NOT
USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD,
RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN
BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
ATTENTION: pour prevenir Les CHOCS ELEC-
TRIQUES NE PAS UTILISER CETTE FICHE POLARISEE AVEC
UN PROLONGATEUR UNE PRISE DE COURANT OU UNE
AUTRE SORTIE DE COURANT, SAUF SI LES LAMES PEUVENT
ETRE INSEREES A FOND SANS EN LAISSER AUCUNE PARTIE
A DECOUVERT.
player's destination. Check that it is set properly before
Plugging the power cord into the outlet. If the voltage
is not properly set or if you move to an area where the
voltage requirements differ, adjust the selector switch
as follows:
@ Use a medium-sized (flat-blade) screwdriver, Insert the
tip of the screwdriver into the groove of the selector
switch and turn it so that the power voltage marking of
your area points to the arrow.
VOLTAGE SELECTOR
SELECTEUR DE TENSION
"This product is manufactured to comply with the radio in-
| terference requirements of EEC Directive 76/889/EEC and
| 82/499/ EEC."
PIONEErY
The future of sound and vision.
<=
2
|
o
4
La
=
(x)
wn
po
po)
babed
Oo