Download Print this page

AKG CU 400 Datasheet page 2

Wireless microphone system
Hide thumbs Also See for CU 400:

Advertisement

Conference
Seminar
House of Worship / Church
School
Live Sound / Club Music
30.5 MHz tuning range
Half 19" all metal case diversity receiver
Automatic setup function designed for less experienced operators
Up to 16 pre-programmed frequencies per group
Pilot Tone prevents unexpected start-up noise
Infrared link of all frequency and setup data to the transmitter
Transmitter battery status monitoring
Programmable warning functions using a two-color display backlighting to indicate critical operation
conditions (low battery, audio peak, RF low)
Compatible with WMS 4500 antenna splitters, power supplies, and high quality directional and
omni-directional antennas
SR 470
SR 470 Receiver Specifications
Carrier frequency range
Band 1:
Band 3:
Band 3-K: 740.1 to 751.9 MHz
Band 5-A: 790.1 to 819.9 MHz
Band 5-B: 806.125 to 809.750 MHz
Band 5-D: 794.1 to 805.9 MHz
Switching bandwidth
30.5 MHz (country dependent)
Sensitivity
6.3 dB V / -100 dBm
Diversity System
Microprocessor-controlled diversity
Modulation
Wideband FM
Audio bandwidth
35 – 20 000 Hz (± 3 dB)
T.H.D.
0.3 %
SNR (A-weighted)
typ. 120 dB(A)
Audio outputs
1 x XLR sockets balanced
1 x TS " / 6.3 mm jack sockets unbalanced
Dimensions
19 inch 1U rack, 202 mm (7.8 in.)
Net / Shipping Weight
972 g (2.2 lbs.)
Standard Accessories
2 UHF antennas, power supply, rack mount kit
Item number:
SR 470
Architects' and Engineers' Specifications
The receiver shall be a stationary diversity design with pilot tone, 1200 carrier frequencies that can be programmed within a 30 MHz wide subband and a rugged half-
rack case with backlit liquid crystal color display. The receiver shall provide indicators for audio and RF levels; diversity mode (A/B); transmitter battery status; name,
frequency, frequency group, and preset (country) name. The color of the backlighting shall change between green and red to indicate normal operation or display user-
selectable warning messages (low battery capacity, audio level, RF level, etc.). The receiver shall select intermodulation-free frequencies automatically from an
integrated frequency database arranged by local frequency allocations and provide an automatic function for finding dead spots. An infrared radiator shall transmit
setup parameter data to the transmitter. Rear panel BNC sockets shall allow either the supplied antennas or a complex antenna network to be connected to the
receiver. The squelch threshold shall be adjustable between –80 and –100 dBm. The receiver's audio bandwidth shall be 35 Hz to 20 kHz; S/N 120 dB(A); THD <0.3%
at 1 kHz. Audio outputs shall comprise a balanced 3-pin XLR output switchable to –30 dB or 0 dB and an unbalanced 1/4" TS jack. The receiver shall provide a
lockable DC input for the supplied 12 V DC power supply. The receiver shall measure 200 x 44 x 190 mm (W x D x H) and weigh 972 g. The receiver shall be the AKG
SR 470 or equivalent.
650 to 680 MHz
720 to 750 MHz
44 mm (1.7 in.) 190 mm (7.4 in.)
3300H00..
Wireless Microphone System
202,4
Band 6-A-ISM: 835.1 to 861.9 & 863.1 to 864.9 MHz
Band 7:
500.1 to 530.5 MHz
Band 8:
570.1 to 600.5 MHz
Band 9:
600.1 to 605.9 & 614.1 to 630.5 MHz
Band 9-U:
600.1 to 630.5 MHz
177

Advertisement

loading

This manual is also suitable for:

Ht 470Pt 470Sr 470Wms 470