Advertisement
Quick Links
S, YP
For the sake of convenience, the illustrations and explana-
tions are based on the SX-220 S.
® For Australia
(YP
stamped
on packing case): Power
line voltage is 240 volts.
®
For
general
export
model
('S' stamped
on
packing
case): A 4-point (110V/120V/220V/240V) voltage selec-
tor switch is provided on the rear panel, and AC outlets
are provided on the rear panel.
In case of S model, please confirm the setting of the line voltage
selector switch,
If it is not set properly, change the setting of it
according to the VOLTAGE
AND
FUSING
VARIATIONS
shown on page 2.
| viceable parts inside; refer servicing to qualified service personnel.
This apparatus is fitted with AC mains power outlet(s) for conve-
Make all connections to the AC outlet(s) and the signal terminals
first. Connect the plug to the wall socket last; make sure that the
power switch is off.
Disconnect the wall plug when the equipment is not in regular use,
6.g. when on vacation.
©@ PIONEER'
Advertisement
Need help?
Do you have a question about the SX-202R and is the answer not in the manual?
Questions and answers