DSE DK-WL1-TUY Instructions

USER MANUAL
DK-WL1-TUY
Tuya WiFi DVR camera
Product description
DK-WL1-TUY is a video recorder equipped with an integrated
camera hidden in an emergency lamp that can be mounted on the
wall or placed on a surface.
1. Microphone
2. Brightness sensor
3. Invisible infrared illuminator
4. Objective
5. Invisible infrared illuminator
6. PIR presence detector
Access the battery compartment
To access the internal battery compartment, rotate the mounting
base clockwise until it is released from the sensor
DSE srl - Digital Surveillance Equipment – www.dse.eu
DK-WL1-TUY Hidden video camera
7. microUSB port for charging power supply
8. WiFi status indicator
Flashing blue = Waiting for wifi configuration Solid blue
= Wifi connected
9. Charging indicator (solid red while charging | off when fully
charged).
10. Slot for micro SD card
11. Reset button (press 8 sec.)
12. Camera power selector
13. Thread for wall bracket included
14. Speaker
Diet
The camera is able to operate solely on its own internal 2.6Ah
battery which allows approximately 4 hours of battery life. For
greater autonomy you can also insert an additional 18650 battery
with cap on the positive (not supplied).
The battery is recharged by connecting a USB power supply
(included) with the cable provided. The charging LED (9) lights up
red during charging and turns off when charging is complete. Full
charging takes approximately 6 hours. It is advisable to place the
camera switch in the OFF position during charging.
The DVR can also operate powered by the mains, with the 220V/
USB power supply always connected and the camera switch set to
ON. In this case you keep the USB cable connected even during
operation and the camera has unlimited autonomy.
Assembly
DK-WL1-TUY is an investigative camera but it is also an emergency
lamp that can be turned on when it is dark if someone passes by. It
can be mounted on the wall, with the included bracket, or placed on
a table, flipping the image from the app.
Document:DK-WL1-TUY 2C4
Page: 1