Soundoff Signal EMPSE15CC-W Manual

Protected by Patents Pending
https://soundoffsignal.com/legal/patent-notification/
WARNING
• HIGH CURRENT interconnects must be properly terminated. Poor crimp
quality can cause heat build-up and fire. Follow the crimp connector
manufacturer instructions.
• DO NOT install this product or route any wires in the Air Bag Deployment
Zone. Refer to vehicle Owner's Manual for deployment zones.
• Do NOT use system to disconnect headlights, brake lights or other safety
equipment.
• Unit may become hot to touch during normal operation.
• Failure to properly install connectors, fuses or wiring may cause vehicle
failure or fire.
• Installation must only be performed by trained technician. Installer must
determine vehicle wiring configuration and proper integration of system.
• Use proper wire gauge. All power wires connecting to positive (+) or
negative (-) battery terminal or local chassis ground (-) must be sized to
supply at least 125% of max. current and properly fused at power source.
• Install protective grommets when routing wire through firewall or metal.
1.800.338.7337 / www.soundoffsignal.com
9x7 SCENE LIGHT
EMPSE15CC-W - 9X7 Screw Mount
EMPSE15CG-W - 9X7 Stud Mount
9 8 7
G
F
E
D
C
B
A
9 8 7
NOTICE:
Installers and users must comply with all applicable federal, state and local laws regarding use and installation of warning
devices. Improper use or installation may void warranty coverage. To review our Limited Warranty Statement & Return Policy
for this or any SoundOff Signal product, visit our website at www.soundoffsignal.com/tech-services/returns/. If you have
questions regarding this product, contact Technical Services, Monday - Friday, 8 a.m. to 5 p.m. ET at 1.800.338.7337 (press
#4). Questions or comments that do not require immediate attention may be emailed to techservices@soundoffsignal.com.
E N H A N C I N G S A F E T Y T H R O U G H I N N O VAT I O N
6 5 4
6 5 4
DIMENSIONS . . . . . . . . . . . . . . . . . . 2
SCENE LIGHT OPTIONS . . . . . . . . . . . 2
TECHNICAL SPECIFICATIONS . . . . . . 2
WIRING INFORMATION . . . . . . . . . 3
STUD MOUNT INSTALLATION . . . . . 4
SCREW MOUNT INSTALLATION . . . 5-6
REPLACEMENT PARTS LIST . . . . . . . 7
WARRANTY INFORMATION . . . . . . 8
IS RECOMMENDED TO USE THE STUD MOUNT OPTION FOR ANY DYNAMIC
MOUNT SURFACES (I.E. SWINGING PANELS, DOORS, AND TAIL GATES)
ROUTE WIRES ONLY IN LOCATIONS THAT ARE NOT SUBJECTED TO
POTENTIAL WEAR. MAKE SURE TO AVOID ROUTING WIRES IN THE
DEPLOYMENT AREA OF YOUR AIR BAG. REFER TO YOUR VEHICLE'S
3 2 1
REVISION LOG
G
REV DESCRIPTION INITIALS ECN DATE
1
01/01/1900
F
E
NOTES:
D
1. CAD DATA IS MASTER
2. VOLUME = $PRPSHEET:{VOLUME MM} mm³
3. BREAK ALL SHARP EDGES, NO BURRS ALLOWED
4. GATE & EJECTOR LOCATIONS TO BE APPROVED
BY SOUNDOFF SIGNAL PRIOR TO TOOL BUILD
5. NO SUBSTITUTION OF MATERIAL ALLOWED WITHOUT
SOUNDOFF SIGNAL APPROVAL
6. VISIBLE SURFACES SHALL NOT HAVE EJECTION
PINS NOR GATE UNLESS APPROVED
7. POWDER COAT:
AKZO NOBEL TUX BLK U1576-2
INTERPON 200
PN243Q (22-7001)
THICKNESS: 2.5-4.0 MILS
PRETREAT: IRON PHOSPHATE C
CHARACTERISTIC NUMBERS
LAST USED DELETED KEY
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN
THIS DRAWING IS THE SOLE
B
PROPERTY OF SOUNDOFF SIGNAL.
ANY REPRODUCTION IN PART OR
®
AS A WHOLE WITHOUT THE
TOLERANCES WRITTEN PERMISSION OF
EXCEPT AS NOTED SOUNDOFF SIGNAL IS PROHIBITED.
.X ± 0.5
THIRD ANGLE
.XX ± 0.25 CAD DIMENSIONS ARE BASIC
PROJECTION
.XXX ± 0.15 UNLESS OTHERWISE SPECIFIED
ANGLES ± .5°
DRAWING B
PRIMARY DIMS: MILLIMETERS
GD&T TO FOLLOW SIZE:
DUAL DIMS: [INCH]
ASME Y14.5M-2009 DO NOT SCALE
MATERIAL:
DESCRIPTION:
9x7 Silicone Light w Accessories A
REVISION:
DRAWING NO:
9x7 Silicone Light w Accessories
1 OF 1
3 2 1 SHEET
IMPORTANT
WARNING
!
OWNER'S MANUAL FOR AIRBAG DEPLOYMENT ZONES.
9X7 SILICONE SCENE
00KPJL 0724 REV B