For Your Safety WARNING - Prior to first use always Please read and comply with this read the Safety instructions ! instruction manual prior to first use of your device. Keep these operating instructions for Failure to observe these operating later use or for a subsequent owner.
Battery charger Keep the charger clean. A soiled device ■ Read all safety warnings and can cause an electric shock. Do not operate the charger on easily instructions. Failure to observe safety ■ flammable surfaces (e.g. paper, warnings and instructions may lead to textiles etc.) or in a flammable electric shock, fire and/or severe injury.
Technical data Start-up (fig. I) Item 5709 300 310 Protect the device against moisture ■ and direct sunlight. Levelling Horizontal and Do not expose to extreme tempera- 1x 90° vertical ■ tures or temperature changes. Accuracy ± 2.3 mm over 30 m E.g.
Accuracy test Button for manual, automatic or ADS mode [5] The anti-drift system (ADS) starts about one Perform the accuracy test before using the device ■ minute after switching the device on and the for the first time, then at regular intervals. In case icon [17] is visible on the display.
Maintenance / care Spare parts Do not use aggressive cleaning agents or solvents. If, in spite of careful manufacturing and test proce- Clean the laser windows with a soft cloth. dures, the device becomes faulty, contact Würth In the unlikely event of a failure or defect, have the masterService to arrange a repair.
Need help?
Do you have a question about the RLDN 22 and is the answer not in the manual?
Questions and answers