Related Manuals for Zenty ZT-424
Summary of Contents for Zenty ZT-424
- Page 1 Zenty | Professional A/V Solution Provider [V1.0] User Manual 4K60Hz HDMI KVM Extender 70M w/ ARC, Ethernet, USB ZT-424 | ZT-4KEX-AEU ZENTY ® 9807 EMILY LANE STAFFORD, TX 77477 (844) 200-1945 SUPPORT@ZENTY.COM...
-
Page 2: Safety Precautions
SAFETY PRECAUTIONS Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment: Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons. -
Page 3: Table Of Contents
Table of Contents 1. Introduction 2. Features 3. Package Contents 4. Specifications 5. Operation Control and Functions 5.1 Transmitter Panel 5.2 Receiver Panel 5.3 Audio Signal Output Switching 5.4 IR Pin Definitions 6. Application Example 7. Maintenance 8. Warranty 9. Mail-In Services 10. -
Page 4: Introduction
(1) × IR Blaster Cable (1) × 20 ~ 60KHz IR Receiver Cable (4) × Mounting Ears (2) × 3-pin Phoenix Connector (1) × 24V/1A Locking Power Adapter (1) × User Manual (844) 200-1945 | sales@zenty.com Copyright © Zenty AV Page 4... -
Page 5: Specifications
1 × SERVICE [Mini-USB, Update port] 1 × USB HOST [USB Type B] Inputs: 1 × HDBT IN [RJ45, 8-pin female] 1 × SPDIF IN Receiver Outputs: 1 x HDMI Type A [19-pin Female] (844) 200-1945 | sales@zenty.com Copyright © Zenty AV Page 5... - Page 6 Feet / Meters Feet / Meters HDMI IN / Out 16ft / 5m 32ft / 10m 50ft / 15m The use of “Premium High Speed HDMI” cable is highly recommended. (844) 200-1945 | sales@zenty.com Copyright © Zenty AV Page 6...
-
Page 7: Operation Control And Functions
▪ Illuminate: Transmitter and Receiver are in good connection status. Connection Signal ▪ Flash: Transmitter and Receiver are in poor connection status. Indicator (on the left side ▪ Dark: Transmitter and Receiver are not connected. of HDBT OUT port) (844) 200-1945 | sales@zenty.com Copyright © Zenty AV Page 7... -
Page 8: Spdif Out
Green LED is on when ARC function is turned on. SPDIF LED Green LED is on when SPDIF OUT port outputs the audio signal returned from SPDIF IN on the Receiver. Two USB 2.0 ports Connect to USB device. (844) 200-1945 | sales@zenty.com Copyright © Zenty AV Page 8... -
Page 9: Audio Signal Output Switching
Switch the output audio signal source for SPDIF OUT and L/R OUT port via the “SWITCH” button on the panel (the corresponding LED will illuminate). The states of ARC LED and SPDIF LED indicate the audio output logic, as shown in the table below: (844) 200-1945 | sales@zenty.com Copyright © Zenty AV Page 9... -
Page 10: Ir Pin Definitions
Note: When the angle between the IR receiver and the remote control is ± 45 °, the transmission distance is 0-5 meters; when the angle between the IR receiver and the remote control is ± 90 °, the transmission distance is 0-8 meters. (844) 200-1945 | sales@zenty.com Copyright © Zenty AV Page 10... -
Page 11: Application Example
6. Application Example (844) 200-1945 | sales@zenty.com Copyright © Zenty AV Page 11... -
Page 12: Maintenance
The items listed are not exclusive but are for illustration only). Parts and service, which are not covered by this limited warranty, are your responsibility. (844) 200-1945 | sales@zenty.com Copyright © Zenty AV Page 12... - Page 13 (844) 200-1945 | sales@zenty.com Copyright © Zenty AV Page 13...
- Page 14 WWW.ZENTY.COM 9807 EMILY LANE STAFFORD, TX 77477 (844) 200-1945 SUPPORT@ZENTY.COM SALES@ZENTY.COM...
Need help?
Do you have a question about the ZT-424 and is the answer not in the manual?
Questions and answers