SOLIS Swiss AIR 3802 Manual

APPLIANCE DESCRIPTION

1. Removable hair filter (please keep clean at all times)
2. Cold air button
3. Heat toggle switch
4. Motor speed and ON/OFF toggle switch
5. Suspension loop
6. Styling nozzle
7. Power cord

Please keep the hair dryer clean and always remove dust and hair to increase its life span.

A Removable hair filter

• To remove sucked-in dust and hair from the hair filter, you can remove the hair filter by gently turning it to the left. Do this only if the appliance is unplugged. Use a brush to clean the hair filter. After cleaning, put the hair filter back in place and lock it by turning it to the right. Only place the hair filter on the hair dryer when dry! The appliance must only be used with the hair filter in place! Regularly cleaning the hair filter greatly increases the life span of the hair dryer.

B Cold air button

• Use the cold air button to increase the fullness and tone of your hair and to stabilise your hairstyle. We recommend using the cold air button after drying and brushing your hair.

C Heat toggle switch

• Use the upper toggle switch to choose from 3 different heat settings: cold, warm and maximum heat. Please refer to the description given in the section "Switching the appliance on and setting heat and motor speed".

D Motor speed and ON/OFF toggle switch

• Use the bottom toggle switch to choose between low and high motor speed resp. switch the appliance off. Please refer to the description given in the section "Switching the appliance on and setting heat and motor speed".

E Suspension loop

• The practical suspension loop can be used to store the hair dryer safely and saving space.

F Styling nozzle

• Use this nozzle to accurately point the jet of hot or cold air at single strands of hair or quickly dry your hair. The styling nozzle can also used while brushing.

G Power cord

STARTING UP

• Please read all safety precautions and information carefully and keep this manual for later reading.

SWITCHING THE APPLIANCE ON AND SETTING HEAT AND MOTOR SPEED

• Use the two toggle switches to adjust heat and motor speed:

C Upper toggle switch: heat

D Lower toggle switch: motor speed and ON/OFF

CLEANING AND MAINTENANCE

• Always pull the plug before cleaning the appliance. Keep the appliance away from water and keep it safe from dust, dirt and lint. Regularly remove and clean the hair filter with a soft brush. After cleaning, reinstall the hair filter. Use only a slightly damp cloth to wipe the appliance clean and dry it afterwards with a soft cloth.

OVERHEATING PROTECTION

• The appliance is equipped with a safety thermostat and the heating element automatically switches off if it overheats. The motor keeps running to cool the heating element. After a short break, the heating element switches back on automatically. You should still make sure that the air inlets and outlets are completely free from dust and lint and, if necessary, clean the appliance with a dry cloth.

SOLIS CUSTOMER SERVICE

It is always worth calling us before sending in the article, as malfunctions can often be easily solved by the appropriate tip or trick from our experts. For country specific contact information, scan the QR code, follow the weblink or call us.

+41 44 874 64 64
www.solis.com/service

SAFETY INFORMATION

• Persons with limited physical, sensory or mental capabilities, or persons with out the appropriate knowledge or experience, including children, may not use the appliance unless they are supervised by a person responsible for their safety or given instruction by such a person as to how the appliance is to be used. In addition, they must understand exactly what hazards may arise from the use of the appliance and how it can be used in a safe manner. Cleaning and maintenance of the appliance may not be carried out by children unless under supervision.
• Repairs to this appliance, including mains cable replacement, may only be carried out by authorised service agents. Improper repair work can be a source of danger to appliance users.
• When the appliance is used in a bathroom, unplug it after use since the proximity of water presents a hazard even when the appliance is switched off.
• We recommend the installation of a residual current circuit- breaker to provide additional protection when using electrical appliances. It is advisable to use a circuit-breaker with a nominal fault current of maximum 30 mA. Your local electrician can advise you.
• 
  
  Never operate this appliance near bathtubs, wash basins or other vessels containing water.
• Do not let children play with the appliance.

www.solis.com

Documents / Resources

References

• Solis.com

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download SOLIS Swiss AIR 3802 Manual