Summary of Contents for Commercial Electric VT-9300
Page 1
Retain this manual for future use. THANK YOU We appreciate the trust and confidence you have placed in Commercial Electric through the purchase of this voltage tester. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement Document #: IM032524 needs.
Safety Information (continued) Table of Contents PRECAUTIONS Table of Contents ......2 Product Specifications ......6 Safety Information ......2 Operation.......... 8 WARNING: Read, understand, and WARNING: BE EXTREMELY Warranty........... 4 Maintenance ........10 CAREFUL IN THE USE OF THE follow the safety rules and operating Pre-Operation........
Safety Information (continued) Pre-Operation FCC COMPLIANCE STATEMENT PRODUCT DESCRIPTION WARNING: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Pre-Operation (continued) Pre-Operation (continued) PRODUCT SPECIFICATIONS TESTING IN CAT III / CAT IV MEASUREMENT LOCATIONS Ensure the test leads shield is pressed firmly in place. Failure to use the CAT III / CAT IV Component Specification shield increases arc-f lash risk. Voltage level indicators 12V, 24V, 48V, 120V, 208V, 240V, 277V, 480V, 600V AC/DC 3.50...
Operation Operation (continued) Voltage Detection GFCI Testing WARNING: To reduce the risk CAUTION: When testing GFCIs of electric shock or injury, test on Neutral Hot installed in 2-wire systems (no Neutral Hot known live circuit before use. ground wire available), the tester may give a false indication that the WARNING: Measuring above GFCI is not functioning properly.
Maintenance TEST LEAD REPLACEMENT If the insulation on the leads is damaged, replace the test leads. Replacement test leads must meet the manufacturer's specifications (EN 61010-031 standard, 600V CAT IV 10A, or better). Care and Cleaning □ Keep the meter dry. If it gets wet, wipe it off. Dirt or moisture in the terminals can affect readings.
Need help?
Do you have a question about the VT-9300 and is the answer not in the manual?
Questions and answers