Getting Started; Step 1: Charging The Battery Pack - Sony Handycam HDR-TG5V Operating Manual

Getting started

Step 1: Charging the battery pack

DC IN jack
You can charge the "InfoLITHIUM" battery pack NP-FH50 after attaching it to your
camcorder.
You cannot attach any "InfoLITHIUM" battery pack other than NP-FH50 to your camcorder.

1
Connect the AC Adaptor to the DC IN jack on the "Handycam" Station
Cradle.
Be sure that the  mark on the DC plug is facing up.

2
Connect the power cord (mains lead) to the AC Adaptor and the wall
outlet (wall socket).
3
Turn off your camcorder by closing the LCD screen.
4
Insert the battery.
 Open the battery/Memory Stick Duo cover.
 Insert the battery in the direction of the arrow all the way in until it clicks.
 Close the battery/Memory Stick Duo cover.
5
Place the camcorder on the "Handycam" Station Cradle as shown above,
and insert it into the "Handycam" Station Cradle securely, all the way to
/CHG (charge) lamp
DC plug
AC Adaptor
Battery pack

Power cord
(Mains lead)
To the wall outlet
(wall socket)
US
13