Advertisement

Lenovo G0A20001WW Manual

Introduction

The motion controllers, working with your Lenovo® Explorer headset, help enhance your mixed reality experience. The controllers and headset are supported by the Windows® 10 operating system (Windows 10 Fall Creators Update).
This document provides information about the motion controllers in typical usage scenarios. You can learn more information about the motion controllers from the Learn Mixed Reality application in the Start menu of Mixed Reality Portal.

Parts and locations

Parts and locations

  1. Trigger button
    Use the button to take various actions in mixed reality, such as selecting, pulling, shooting, or grabbing. This button has different functions depending on applications and games.
  2. Grab button
    Use the button to grab an object in certain applications and games.
  3. Pairing button
    Use the button to pair the controller with the computer.
  4. Battery Remove the cover to install the AA batteries. For more compartment information, see "Installing the AA batteries". cover
  5. Constellation
    The constellation with integrated light-emitting diodes (LEDs) helps track the positions and movements of the motion controller precisely. For more information, see "Motion controller vibrations and constellation LEDs behavior".
  6. Thumbstick (left and right)
    Use the thumbstick to move in mixed reality space, such as teleporting yourself, flying a starship, or driving a car.
  7. Menu button
    Press the button to bring up or exit the menu in an application, or bring up or exit the shortcut menu in the Start menu of Mixed Reality Portal.
  8. Touchpad
    The touchpad surface is sensitive to finger touch and movement. In the Windows Mixed Reality home, you can use the touchpad to scroll content in a two-dimensional (2-D) application. The touchpad has different functions depending on the application or game.
  9. Windows button
  • To turn on the controller, press and hold the Windows button until the controller vibrates once and the constellation lights are solid on.
  • To turn off the controller, press and hold the Windows button until the controller vibrates twice and the constellation lights are off.
  • In the Windows Mixed Reality home, press the button to bring up or exit the Start menu of the Mixed Reality Portal application. In an application or game, press the button to exit the application or game and go back to the Windows Mixed Reality home.
  1. Controller strap
    Wear the controller strap on your wrist to avoid dropping the motion controller by accident.

Installing the AA batteries

Installing the AA batteries

Pairing the motion controller

To pair the motion controller with the computer, do the following:

  1. Remove the battery compartment cover from the motion controller.
  2. Turn on the motion controller by pressing and holding the Windows button until the motion controller vibrates once and the constellation LEDs are solid on.
  3. Enable Bluetooth pairing on the motion controller by pressing and holding the pairing button until the constellation LEDs begin pulsing slowly.
  4. Enable Bluetooth pairing on the computer to discover and pair the motion controller. When connected, the motion controller vibrates once and the constellation LEDs are solid on.
  5. Reinstall the battery compartment cover.

Updating the firmware

Connect the Lenovo Explorer headset to your computer and pair the controller with your computer. If the latest controller firmware is available, the firmware will be downloaded to the controller and installed automatically the next time you turn on the controller. During the installation process, controller LEDs are illuminated and keep blinking in a circular motion for 1-2 minutes. After the firmware update is completed, the controller will restart and reconnected to the headset.

Motion controller vibrations and constellation LEDs behavior

The motion controller vibrations and constellation LEDs indicate the status of the motion controller.

Motion controller status Motion controller vibrations Constellation LEDs behavior
Turning on or paired Once On
Turning off Twice Off
Sleep Blink every three seconds
Pairing Pulse slowly
Paring failed or timeout Three times Blink three times
Disconnected from computer Once Blink once
Battery power low Twice
  • Blink twice if the battery power is low.
  • Blink three times if the battery power is critically low.
Firmware update Blink in a circular pattern

Notes:

  • The motion controller enters sleep mode if it is idle for over 30 seconds. The motion controller automatically wakes up when it detects motion.
  • The motion controller turns off automatically if it is idle for over three minutes.
  • You can check the battery status by the battery-status icon on the motion controller in mixed reality. The icon is red when the battery power is low.

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Lenovo G0A20001WW Manual

Advertisement

Need help?

Need help?

Do you have a question about the G0A20001WW and is the answer not in the manual?

Questions and answers

Table of Contents