Bose SOUNDSPORT PULSE Manual
![]()
GETTING STARTED
Unpacking
Carefully unpack the carton and confirm that the following parts are included:
![]()
![]()
Note: Medium (M) tips are attached to the earbuds.
If any part of the product is damaged, do not use it. Contact your authorized Bose dealer immediately or Bose customer service.
Headphone components
![Bose - SOUNDSPORT PULSE - Headphone components overview Headphone components overview]()
Powering on/off
To power on:
Press the Power/Bluetooth button until the battery indicator glows green, yellow, or red (to indicate the current battery charge level).
To power off:
Press and hold the Power/Bluetooth button until the battery indicator blinks three times and you hear the power-down tones.
![Bose - SOUNDSPORT PULSE - Powering on/off Powering on/off]()
BOSE® CONNECT APP
Enhance your experience with the Bose® Connect app.
![www.apple.com]()
![play.google.com]()
Features
- Unlock the full potential of your SoundSport® Pulse wireless headphones.
- Free app compatible with most Apple and Android™ systems.
- Easily pair your mobile device with your headphones.
- View your real-time heart rate.
- Easily connect and switch between multiple mobile devices.
- Disable voice prompts.
- Keep your headphones up-to-date with the latest software.
- Customize headphone settings, like voice prompt language and standby timer.
CHARGING THE BATTERY
Connecting the USB cable
![]()
Use this product only with an agency approved power supply which meets local regulatory requirements (e.g., UL, CSA, VDE, CCC).
- Open the hinged door on the bottom of the right earbud.
- Plug the small end of the USB cable into the USB connector.
![]()
- Plug the other end into a USB wall charger or computer that is powered on.
- While charging, the battery indicator blinks amber.
- When the battery is fully charged, the battery indicator glows green.
- Allow up to two hours to fully charge the battery. A full charge powers the headphones for up to five hours.
- The headphones will not play while charging.
Note: Before charging, be sure the headphones are at room temperature, between 41°F (5°C) and 104°F (40°C).
Checking the battery
- Each time you power on the headphones, the voice prompt announces the headphone battery charge level, and the battery indicator glows for 10 seconds. When you press any of the headphone controls, the battery indicator glows for 10 seconds. For more information, see "Battery indicator".
- While the headphones are in use, the battery indicator blinks red when the battery needs charging.
- If you are connected to an Apple device, the device displays the headphone battery charge level near the upper right corner of the screen.
HEADPHONE STATUS INDICATORS
The Bluetooth and battery indicators are located on the back of the right earbud.
![Bose - SOUNDSPORT PULSE - Headphone Status Indicators Headphone Status Indicators]()
Bluetooth indicator
Indicator activity | System state |
Blinking blue | Ready to pair |
Blinking white | Connecting |
Solid white | Connected |
Battery indicator
Indicator activity | System state |
Green | Medium to full charge |
Amber | Low charge |
Blinking amber | Charging |
Blinking red | Need to charge |
Solid red | Charging error - contact Bose® customer service |
IMPORTANCE OF PROPER FIT
Choosing the correct StayHear®+ Pulse tip
For optimal audio performance, it is important to choose the correct size StayHear®+ Pulse tip. Select the size that gives you the best comfort and fit in each ear. To determine the best fit, you may need to try all three sizes. You may need a different size for each ear.
Note: To test the fit, try speaking aloud. Your voice should sound muffled in both ears; if not, select another tip size.
Each StayHear®+ Pulse tip and earbud is marked with either an L or an R. Be sure to attach the left tip to the left earbud and the right tip to the right earbud.
![]()
Fitting the earbuds to your ear
The StayHear®+ Pulse tip allows the earbud to rest comfortably and securely in your ear. The tip wing fits just under your ear ridge.
- Insert the earbud so the StayHear®+ Pulse tip gently rests in the opening of the ear canal.
- Tilt the earbud back and tuck the tip wing under the ear ridge until it is secure.
![]()
Changing the StayHear®+ Pulse tips
- Holding the earbud by the stem, gently grasp the attached StayHear®+ Pulse tip and peel it away from the earbud.
![]()
To prevent tearing, grasp the StayHear®+ Pulse tip by its base. Do not pull on the tip wing.
![Bose - SOUNDSPORT PULSE - Changing the StayHear®+ Pulse tips - Step 1 Changing the StayHear®+ Pulse tips - Step 1]()
- Align the opening of the new StayHear®+ Pulse tip with the earbud nozzle and rotate the tip onto the nozzle.
Note: Make sure the heart rate sensor (left earbud) and heart rate sensor replica (right earbud) protrude through the matching cutouts on the tips.
![Bose - SOUNDSPORT PULSE - Changing the StayHear®+ Pulse tips - Step 2 Changing the StayHear®+ Pulse tips - Step 2]()
- Press the base of the tip until it clicks securely into place.
VOICE PROMPTS
Voice prompts guide you through the pairing and connecting processes.
Pre-installed languages
The following languages are pre-installed on your headphones:
- English
- Spanish
- French
- German
- Mandarin
- Japanese
- Korean
- Italian
- Portuguese
- Swedish
- Dutch
Check for additional languages
Additional languages may be available. To check for language updates, download the Bose® Updater.
Visit: btu.Bose.com
Changing the language
When you turn on the headphones for the first time, the voice prompts are in English. To select a different language:
- Press and hold
and
simultaneously until you hear the voice prompt for the first language option. - Press
or
to move through the list of languages. - When you hear your language, press and hold
to select.
Note: You can also change the voice prompt language using the Bose Connect app.
BLUETOOTH TECHNOLOGY
Bluetooth wireless technology lets you stream music from mobile devices such as smartphones, tablets and laptop computers. Before you can stream music from a mobile device, you must pair the mobile device with your headphones.
Pairing your mobile device using the Bose® Connect app (recommended)
- Power on your headphones.
- Download the Bose® Connect app and follow the on-screen connection instructions.
![]()
Once paired, you hear "Connected to <device name>" and the Bluetooth indicator glows solid white.
Choosing an alternate pairing method
If you are unable to pair your mobile device using the Bose® Connect app, you can pair using the Bluetooth settings menu or Near Field Communication (NFC).
What is NFC?
NFC uses Bluetooth technology to let two devices establish wireless communication with each other by simply tapping the devices together. Refer to your mobile device owner's guide to see if your model supports NFC.
If your mobile device does not support Bluetooth pairing via NFC or if you are unsure: | Follow the instructions for "Pairing your mobile device using the Bluetooth menu". |
If your mobile device supports Bluetooth pairing using NFC: | Follow the instructions for "Pairing your mobile device using NFC". |
Note: If your mobile device supports Bluetooth pairing via NFC, you can use either pairing method.
- With your headphones powered on, press and hold the Power/Bluetooth button until you hear "Ready to pair" or the Bluetooth indicator blinks blue.
![]()
- On your mobile device, turn on the Bluetooth feature.
Tip: The Bluetooth feature is usually found in the Settings menu. - Select your Bose® SoundSport® Pulse wireless headphones from the device list.
![]()
Once paired, you hear "Connected to <device name>" and the Bluetooth indicator glows solid white.
Pairing your mobile device using NFC
- With your headphones powered on, unlock your mobile device and turn on the Bluetooth and NFC features. Refer to your mobile device owner's guide to learn more about these features.
- Tap the NFC touchpoint on your mobile device to the back of the inline remote.
Your mobile device may prompt you to accept pairing
.![Bose - SOUNDSPORT PULSE - Pairing your mobile device using NFC Pairing your mobile device using NFC]()
Once paired, you hear "Connected to <device name>" and the Bluetooth indicator glows solid white.
Disconnecting a mobile device
- Turn off the Bluetooth feature on your mobile device.
- If your mobile device supports NFC, tap the NFC touchpoint on your mobile device to the back of the inline remote.
Reconnecting a mobile device
- When powered on, the headphones try to reconnect with the two most recently-connected mobile devices.
Note: The mobile devices must be within range and powered on. - If your mobile device supports NFC, tap the NFC touchpoint on your mobile device to the back of the inline remote.
MANAGING MULTIPLE CONNECTED DEVICES
You can store up to eight paired mobile devices in the headphone pairing list and your headphones can be actively connected to two mobile devices at a time.
Note: You can only play audio from one mobile device at a time.
Switching between two connected mobile devices
- Pause audio on your first mobile device.
- Play audio on your second mobile device.
Identifying connected mobile devices
Press the Power/Bluetooth button to hear which mobile devices are currently connected.
Reconnecting a previously paired mobile device
- Press the Power/Bluetooth button to hear which mobile device is connected.
- Press the Power/Bluetooth button again within three seconds to connect to the next mobile device in the headphone pairing list. Repeat until you hear the correct mobile device name.
- Play audio on the connected mobile device.
Clearing the headphone pairing list
- Press and hold the Power/Bluetooth button for 10 seconds, until you hear "Bluetooth device list cleared."
- Delete your SoundSport® Pulse wireless headphones from the Bluetooth list on your mobile device.
All mobile devices are cleared and the headphones are ready to pair a new mobile device.
Using the Bose® Connect app
You can also easily manage multiple connected devices using the Bose Connect app.
For more information, see "Bose® Connect App".
HEART RATE SENSOR
Viewing your heart rate in the Bose® Connect app
After your headphones are connected to your mobile device, you can view your real-time heart rate in the Bose® Connect app.
![]()
Note: To view your heart rate, make sure the left earbud is securely in place throughout your workout.
Viewing your heart rate in a fitness app
After your headphones are connected to your mobile device, you can view your heart rate in most popular fitness apps. To begin, set up your headphones as the heart rate sensor in your fitness app.
Tips for setup
- During setup, keep your earbuds in your ears.
- During setup, move away from any other devices with heart rate sensors.
- In your fitness app's Settings menu, look for a "Devices," "Hardware" or "Heart Rate Monitor" menu. Select "Search for sensor" or "Auto-connect."
- Some fitness apps may require you to select HR-Bose SoundSport Pulse as the heart rate sensor in the device list.
- Some fitness apps may require you to select "Start workout" to view your heart rate.
- Make sure the left earbud is securely in place throughout your workout.
- Refer to your fitness app's help menu for more information on connecting to a heart rate sensor.
- To view setup videos and help articles for specific fitness apps, visit: global.Bose.com/Support/SSP
Note: Some fitness apps require a paid subscription to view detailed heart rate data.
HEADPHONE CONTROLS
The headphone controls are located on the inline remote below the right earbud.
![]()
Function | What to do |
Play/Pause | Press . |
Skip Forward | Press twice quickly. |
Skip Backward | Press three times quickly. |
Fast forward | Press twice quickly and hold the second press. |
Rewind | Press three times quickly and hold the third press. |
Volume Up | Press . |
Volume Down | Press . |
Call functions
Function | What to do |
Answer a call | Press . |
End a call | Press . |
Decline an incoming call | Press and hold for one second. |
Answer a second incoming call and put the current call on hold | While on a call, press once. |
Decline a second incoming call and stay on current call | While on a call, press and hold for one second. |
Switch between two calls | With two active calls, press twice. |
Create a conference call | With two active calls, press and hold for one second. |
Activate voice control | While not on a call, press and hold for one second. Refer to your mobile device's owners guide for compatibility and usage information about this feature. |
Mute/unmute a call | While on a call, press and simultaneously. |
CARE AND MAINTENANCE
Storing
- Turn off the headphones when not in use.
- Before storing the headphones for more than a few months, fully charge the battery.
- Place the headphones in the carry case for storage.
Cleaning
Your headphones may require periodic cleaning.
StayHear®+ Pulse tips: Remove the tips from the earbuds and wash them with a mild detergent and water. Make sure you thoroughly rinse and dry the tips before attaching them to the earbuds.
Headphone nozzles: Clean only with a dry, soft cotton swab or equivalent. Never insert any cleaning tool into the nozzle.
Replacement parts and accessories
Replacement parts and accessories can be ordered through Bose customer service.
Customer service
For additional help using your headphones, visit: global.Bose.com/Support/SSP
Input Rating: 5V
1A
TROUBLESHOOTING
Problem | What to do |
Headphones don't turn on | - Power on the headphones (see "Powering on/off").
- Charge the battery.
|
Headphones don't pair with mobile device | - On your mobile device:
- Turn the Bluetooth feature off and then on.
- Delete your Bose® SoundSport® Pulse headphones from the Bluetooth list on your mobile device. Pair again.
- Move your mobile device closer to the headphones and away from any interference or obstructions.
- Pair a different mobile device.
- Visit: global.Bose.com/Support/SSP to see how-to videos.
- Clear the headphone pairing list: Press and hold the Power/Bluetooth button for 10 seconds until you hear "Bluetooth device list cleared." Delete your Bose SoundSport Pulse headphones from the Bluetooth list on your mobile device. Pair again.
- Power the headphones off and then on.
- Power your mobile device off and then on.
|
Headphones don't pair with NFC-enabled mobile device | - Make sure your mobile device supports NFC.
- Unlock your mobile device and turn on the Bluetooth and NFC features.
- Tap the NFC touchpoint on the back of your mobile device to the back of the inline remote.
- Power the headphones off and then on.
- Power your mobile device off and then on.
|
No sound | - Power on the headphones and charge the battery.
- Increase the volume on your headphones and mobile device.
- Press the Power/Bluetooth button to hear the connected mobile device. Make sure you are using the correct device.
- Move your mobile device closer to the headphones and away from any interference or obstructions.
- Use a different music source.
- Pair a different mobile device.
- If two mobile devices are connected, pause audio on the first mobile device and play audio on the other mobile device.
- If two mobile devices are connected, move the mobile devices within range of the headphones (30 ft. or 9 m).
|
Poor sound quality | - Use a different music source.
- Pair a different mobile device.
- Disconnect the second mobile device.
- Move the mobile device closer to the headphones, and away from any interference or obstructions.
- Clear any debris or wax buildup from the earbuds and headphone nozzles.
|
Headphones don't charge | - Open the hinged door on the bottom of the right earbud and securely connect the small end of the USB cable to the USB connector. Make sure the connector on the cable is correctly aligned with the connector on the headphones.
- Secure both ends of the USB cable.
- If your headphones have been exposed to high or low temperatures, let the headphones return to room temperature and then try charging again.
|
Heart rate does not appear in Bose Connect app | - In the Bose Connect app, make sure your Bose® SoundSport® Pulse headphones are connected to your mobile device.
- Make sure the left earbud fits securely in your ear. You may need to try a different size StayHear®+ Pulse tip.
- Close and relaunch the Bose Connect app.
- Power the headphones off and then on.
- On your mobile device, turn the Bluetooth feature off and then on.
|
Heart rate does not appear in fitness app | - In the Bluetooth list on your mobile device, make sure your Bose® SoundSport® Pulse headphones are selected.
- Make sure the left earbud fits securely in your ear. You may need to try a different size StayHear®+ Pulse tip.
- In some fitness apps, you may need to select "Start workout" to view your heart rate.
- Close and relaunch the fitness app.
- Power the headphones off and then on.
- On your mobile device, turn the Bluetooth feature off and then on.
- Refer to your fitness app's help menu for more information on connecting to a heart rate sensor.
- To view setup videos and help articles for specific fitness apps, visit: global.Bose.com/Support/SSP
|
IMPORTANT SAFETY INSTRUCTIONS
Please read and keep all safety and use instructions.
WARNINGS/CAUTIONS
- Do NOT use the headphones at a high volume for any extended period.
- To avoid hearing damage, use your headphones at a comfortable, moderate volume level.
- Turn the volume down on your device before placing the headphones in/on your ears, then turn the volume up gradually until you reach a comfortable listening level.
- Use caution and follow applicable laws regarding mobile phone and headphone use if using the headphones for phone calls while driving. Some jurisdictions impose specific limitations, such as single earpiece configuration, on the use of such products while driving. DON'T use the headphones for any other purpose while driving.
- Focus on your safety and that of others if you use the headphones while engaging in any activity requiring your attention, e.g., while riding a bicycle or walking in or near traffic, a construction site or railroad, etc. Remove the headphones or adjust your volume to ensure you can hear surrounding sounds, including alarms and warning signals.
- Do NOT use the headphones if they emit any loud unusual noise. If this happens, turn the headphones off and contact Bose customer service.
- Do NOT submerge or expose the headphones for extended period to water, or wear while participating in water sports, e.g., swimming, waterskiing, surfing, etc.
- Remove headphones immediately if you experience a warming sensation or loss of audio.
- Do NOT use mobile phone adapters to connect headphones to airplane seat jacks, as this could result in injury or property damage due to overheating.
Contains small parts which may be a choking hazard. Not suitable for children under age 3.
This product contains magnetic material. Consult your physician on whether this might affect your implantable medical device. - Do NOT make unauthorized alterations to this product.
- Use this product only with an agency approved power supply which meets local regulatory requirements (e.g., UL, CSA, VDE, CCC).
- Do not expose products containing batteries to excessive heat (e.g. from storage in direct sunlight, fire or the like).
Documents / Resources
References
Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download Bose SOUNDSPORT PULSE Manual
Need help?
Do you have a question about the SOUNDSPORT PULSE and is the answer not in the manual?
Questions and answers