Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Paccar DAF POWERCHOICE 360X CABINET
Summary of Contents for Paccar DAF POWERCHOICE 360X CABINET
- Page 1 POWERCHOICE 360X CABINET User manual A PACCAR COMPANY DRIVEN BY QUALITY...
- Page 2 PACCAR. PACCAR assumes no responsibility for any errors that may appear in this document. In no event shall PACCAR be liable for direct, indirect, special, incidental or consequential damages of any nature or kind arising from the...
-
Page 3: Table Of Contents
Contents Preface About the document How to use this manual Target groups Notational convention Contact information Turn on/off the charger Switch the charger on Switch the charger off Operation Start the charge session Stop the charge session Abnormal operation 3.3.1 During the charging session, the communication gets lost Emergency stop Troubleshooting... -
Page 4: Preface
1. Preface This section gives the operational description of the PACCAR Electric Vehicle Supply Equipment (EVSE). About the document This document is part of the technical handbook which is an integral part of the Electric Vehicle Supply Equipment (EVSE), the PowerChoice 360X. -
Page 5: Notational Convention
Notational convention Throughout the documentation, there are blocks of text printed in a different way than the surrounding text. These blocks of text require the attention of the reader to avoid dangerous situations or to get additional information for an easy understanding. The blocks of text are shown as: Symbol Description... -
Page 6: Turn On/Off The Charger
2. Turn on/off the charger Switch the charger ON Warning: Make sure the charger is switched off and it is not in charging mode before opening the controller cabinet door. Note: The details of the instructions mentioned below are for each of the base product cabinet. -
Page 7: Operation
3. Operation This chapter gives a familiarization with the operation of the EVSE with respect to daily and abnormal operation. The operation of the EVSE is always in relation with an EV. The EV acts as a client (asking party) and the EVSE acts as a host (supply party). -
Page 8: Start The Charge Session
Start the charge session Procedure 1. Stop the electrical vehicle at the correct position. 2. Activate the hand brake. 3. Make sure the power of the EVSE is switched on. The EVSE is in standby. The status indicator shows green continuously. 4. -
Page 9: Troubleshooting
4. Troubleshooting If the charger is in an error state (red indicator), the user can try to do a soft reset: 1. Press the emergency button. 2. Release the emergency button. The system will reinitialize and restart. If the fault is resolved and not service critical, the system will become available again. If the fault is not resolved, start the issue resolution process by contacting the first line of support. - Page 10 5600 PT Eindhoven The Netherlands daf.com ISO14001 IATF16949 Environmental Quality Management System Management System All rights to copyrights, registered trademarks, and trademarks reside with their respective owners. Copyright © 2022 PACCAR/Heliox. All rights reserved. A PACCAR COMPANY DRIVEN BY QUALITY...
Need help?
Do you have a question about the DAF POWERCHOICE 360X CABINET and is the answer not in the manual?
Questions and answers