I/O Connector Definitions - Sceptre X37SV-Komodo User Manual

I/O Connector Definitions

AC Power
1.
This connection is for providing power to the TV. This connection uses a standard
computer power cord.
2. TV Tuner
This connection port is used for connecting antenna, satellite box or cable service
via TV source. If you are using a satellite box, select cable as your cable/air
setting. If you are connecting for cable service or antenna, please don't forget to
switch for the correct setting under TV setup and scan for the channels. This
connection uses a coaxial cable.
3. Service Port
This is used for factory service by SCEPTRE's technicians (do not tamper with this
port).
4. AV1 & AV2
These connection ports are used for connecting composite devices, such as VCR,
DVD player, game console, or set-top box via AV1 or AV2 source. Use the
connectors white (L) and red (R) for audio and the yellow (AV) for video. You
can also substitute the yellow (AV) by using the black connector (S-VIDEO) for a
better picture. Please note you can only connect one type of video connector at a
time. Please do not connect both S-VIDEO and AV at the same time. This
connection uses RCA audio cable for sound, composite cable for video or s-video
cable for video.
5. Line Out
This connection port is used for sending out audio signals to other audio devices
such as stereo/surround sound receivers and sending out video signals to other
video device such as TV monitor or VCR. The red (R) and white (L) connectors
sends out the audio signal. The yellow (AV OUT) connector sends out the video
signal. The black (SUBWOOFER OUT) connector sends out bass signals to a
subwoofer. This connection uses RCA audio cable for sound, composite cable for
video, and a subwoofer cable for bass.
SCEPTRE X37 Page19