Menu Options; Capture Menu - Sanyo VPC-T1495 Instruction Manual

MENU OPTIONS

Capture Menu

This menu is for the basic settings to be used when capturing still images.
MENU SET
1. Press the
ON/OFF
2. Press the
MODE
3. Press the
MENU
4. Select the desired option item with the
enter its respective menu.
The selectable items may vary in different capture modes.
5. Select the desired setting with the
6. To exit from the menu, press the
Size
This sets the size of the image that will be captured.
* 14M / 8M / 4M / 2M / VGA
ISO
This sets the sensitivity for capturing images. When the sensitivity is raised (and the
ISO figure is increased), photography will become possible even in dark locations, but
the more pixelated (grainier) the image will appear. Set to ISO 3200/6400 image size
will be 2M.
* Auto / ISO100 / ISO 200 / ISO 400 / ISO 800 / ISO 1600 / ISO 3200 / ISO 6400
Quality
This sets the quality (compression) at which the image is captured.
* Fine / Standard / Economy
W. Balance
This sets the white balance for a variety of lighting conditions and permits images to be
captured that approach the conditions that are seen by the human eye.
*Auto / Incand. / Fluoresc.1 / Fluoresc.2 / Daylight / Cloudy / Manual WB
Sharpness
This sets the sharpness of the image that will be captured.
* Hard / Standard / Soft
Color
This sets the color of the image that will be captured.
* Standard / Vivid / Sepia / B&W / Blue / Red / Green / Yellow / Purple
4
MP
AUTO
MENU
button to turn the power on.
button, and set the camera mode to any scene mode.
button to enter the [Capture] menu.
MENU
SET
/ buttons, and press the
/ buttons, and press the
button.
button to
SET
button.
SET
EN-31