Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Track Technologies Target Blu Eye 2
Summary of Contents for Track Technologies Target Blu Eye 2
- Page 1 USER MANUAL TARGET BLU EYE 2 LED DISPLAY + LASERTRACK Know what’s out there...
-
Page 2: Table Of Contents
CONTENT THE INTRODUCTION OF TARGET BLU EYE 2 LED DISPLAY FUNCTIONS SIGNAL STRENGTH METER (MONO/STEREO) VISUAL AND ACOUSTIC SIGNALS FOR A LASER MEASUREMENT MEMORY FUNCTION FOR ON/OFF VOLUME AND BRIGHTNESS AUDIO MODE TEMPORARY MUTE CONTINUOUS MUTE DIM-ON-RED CITY MODE DARK MODE... - Page 3 INTRODUCTION Thank you for choosing Target Blu Eye 2. With Target Blu Eye, you will always be alerted well in advance of approaching emergency services, including ambulances, fire trucks, police, and unmarked surveillance vehicles, even when they are traveling at high speed without flashing lights or sirens.
-
Page 4: Led Display Functions
LED DISPLAY FUNCTIONS The LED display is installed by the installer behind the glass of your rearview mirror. The display can be operated using buttons 1 and 2 located at the bottom edge of the mirror. Signal Strength Meter Display number of emergency services / laser measurement front Status LED Laser measurement rear... -
Page 5: Memory Function For On/Off
MEMORY FUNCTION FOR ON/OFF SWITCHING Target Blu Eye features a memory function for turning on or off. Do you want to prevent your system from automa- tically turning on when the ignition is activated? • Press and hold button 1 for 2 seconds before turning off the car’s ignition: a short sound signal will be heard, and the status LED will turn off. -
Page 6: Continuous Mute
CONTINU MUTE This continuously suppresses the acoustic alarm. Press button 1 twice briefly to activate CONTINUOUS MUTE: you will hear 2 short sound signals, and the status LED will fade blue, turning on for 2 seconds and then briefly off. The CONTINUOUS MUTE status remains activated for the entire journey. -
Page 7: Lasertrack
LASERTRACK REMOTE CONTROL When LaserTrack is used as a remote control, the status LED is blue. Once a programmed electric door or gate comes within the range of LaserTrack, the following notifications will occur: • Three short sound signals will be heard. •... - Page 8 Deleting Laser Protection Software During a Laser Alarm: • Press and hold button 2 for 3 seconds. • A multi-tone sound signal will sound for 5 seconds. • The status LED will light up blue for 3 seconds and then transition to cooldown: laser protection and laser detection are now deleted.
- Page 9 Zuidergracht 19 | 3763 LS Soest | the Netherlands info@tracktechnologies.nl | +31 (0)35 760 5760 www.tracktechnologies.nl www.blu-eye.eu...
Need help?
Do you have a question about the Target Blu Eye 2 and is the answer not in the manual?
Questions and answers