Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Track Technologies TARGET BLU EYE 2
Summary of Contents for Track Technologies TARGET BLU EYE 2
- Page 1 MANUAL | TARGET BLU EYE 2 Know what’s out there...
- Page 2 CONTENTS THE INTRODUCTION TO TARGET BLU EYE 2 LED DISPLAY FUNCTIONS MEMORY FUNCTION FOR SWITCHING ON/OFF VOLUME AND BRIGHTNESS MUTE CITY / HIGHWAY MODE VISUAL AND ACOUSTIC ALERT FOR APPROACHING EMERGENCY SERVICES VISUAL AND ACOUSTIC ALERT LASERTRACK FLARE PAUSE LASER PROTECTION / DELETE LASER PROTECTION SOFTWARE...
- Page 3 INTRODUCTION Thank you for choosing Target Blu Eye 2. With Target Blu Eye, you will always be alerted in plenty of time for approaching emergency services such as ambulances, fire brigades, police and unmarked surveillance vehicles. Even when they are travelling at high speed and without siren and flashing lights.
- Page 4 LED DISPLAY FUNCTIONS The LED display is installed by the technician behind the glass of the rear-view mirror. The display can be operated using buttons 1 and 2 located on the bottom edge of the mirror. Signal strength meter Display number of emergency services / laser measurement in front Status LED Laser measurement behind MEMORY FUNCTION FOR SWITCHING ON/OFF...
- Page 5 MUTE Suppresses acoustic alarms temporarily • Press button 1 once briefly to activate the MUTE function; a short acoustic signal sounds and the status LED flashes blue. • The MUTE status remains activated 30 seconds after the last notification. When a new announcement is made, you are automatically alerted again by the acoustic signal.
- Page 6 VISUAL AND ACOUSTIC ALARM LASERTRACK FLARE If your Blu Eye is paired with LaserTrack Flare, these notifications will also be shown via the display in the rearview mirror. When approaching memory-programmed automatic gates and/or doors, you will receive the following notifications: Visual: •...
- Page 7 PAUSE LASER PROTECTION / DELETE LASER PROTECTION SOFTWARE Interrupt laser protection during laser alarm: • Press 1 x briefly on either button. • The status LED lights up red and goes on and off smoothly; laser protection is now inactive. Delete laser protection software (note: this can only be done during Cooldown) •...
- Page 8 Zuidergracht 21 | 3763 LS Soest | the Netherlands info@tracktechnologies.nl | +31 (0)35 760 5760 www.tracktechnologies.nl www.blu-eye.eu...
Need help?
Do you have a question about the TARGET BLU EYE 2 and is the answer not in the manual?
Questions and answers