CONTENTS INTRODUCTION TARGET BLU EYE 2 BLU EYE STAND-ALONE; LED DISPLAY FUNCTIONS MEMORY FUNCTION FOR SWITCHING ON/OFF VOLUME AND BRIGHTNESS MUTE CITY / HIGHWAY MODE VISUAL AND ACOUSTIC ALARMS FOR APPROACHING EMERGENCY SERVICES...
Page 3
INTRODUCTION Thank you for choosing Target Blu Eye 2. With Target Blu Eye, you will always be alerted in plenty of time for approaching emergency services such as ambulances, fire brigades, police and unmarked surveillance vehicles. Even when they are travelling at high speed and without siren and flashing lights. The emergency services use what is known as Tetra radio systems.
BLU EYE STAND-ALONE; LED DISPLAY FUNCTIONS The LED display is installed by the technician behind the glass of the rear-view mirror. The display can be operated using buttons 1 and 2 located on the bottom edge of the mirror. Signal strength meter Display number of emergency services / laser measurement in front Status LED Laser measurement behind...
MUTE Suppresses acoustic alarms temporarily. • Press button 1 once briefly to activate the MUTE function; a short acoustic signal sounds and the status LED flashes blue. • The MUTE status remains activated 30 seconds after the last notification. When a new announcement is made, you are automatically alerted again by the acoustic signal.
VISUAL AND ACOUSTIC ALARMS FOR APPROACHING EMERGENCY SERVICES If an emergency service approaches you, you will receive the following notifications: • The LEDs of the signal strength meter light up from green to red. Green indicates a greater distance to an emergency service.
Page 7
Zuidergracht 21 | 3763 LS Soest | the Netherlands info@tracktechnologies.nl | +31 (0)35 760 5760 www.tracktechnologies.nl www.blu-eye.eu...
Need help?
Do you have a question about the TARGET BLU EYE 2 STAND-ALONE and is the answer not in the manual?
Questions and answers