TECshow VISUAL PIX User Manual page 3

2. SAFETY INSTRUCTIONS
For your own personal safety, please
read and understand this manual
completely before you attempt to
install or operate this unit!
• Please keep this User Manual for future reference.
If you sell the unit to another user, be sure that he
also receives this instruction booklet.
• Unpack and check the unit carefully that it has
not been damaged during transport before using
the unit.
• Before operating, ensure that the voltage and
frequency of power supply match the power
requirements of the unit.
• The unit is for indoor use only in a dry location.
CAUTION! TAKE CARE USING THIS EQUIPMENT!
High voltage-risk of electric shock!
3. MAINTENANCE
Periodical to maintain the wash light:
• Check the screw of the spare parts in order to use
well.
• Clearing the dust and fragments of the inner
wash light, to keep the inner wash light clearly.
• Clearing the lens.
• The unit must be installed in a location with
adequate ventilation, at least lm from adjacent
surfaces. Be sure that no ventilation slots are
blocked.
• Make sure there are no inflammable materials
close to the unit during operation.
• Use safety cable when fixing this unit.
• In the event of serious operating problem, stop
using the unit immediately.
• Never try to repair the unit by yourself. Repair
carried out by unskilled people can lead to
damage or malfunction.
• Please contact the nearest authorized technical
assistance center and always use the same type
of spare parts.
• Do not touch any wires during operation as high
voltage might be causing electric shock.
• More dust, smoke and granular can cause
appearance of the wash light corrosively-even
cause overheated to damage equipment
• ATTENTION: Before take the light apart, please
cut the power source.
P. 3
English Version | Tecshow VISUAL PIX