(Your Dvd Player Will Only Play Dvds That Are Labeled With Identical Region Codes.) Listening To A Cassette - Samsung MAX-DT95 Instruction Manual

Listening to a Cassette
Always treat your cassettes with care; refer, if necessary, to the section entitled
"Precautions When Using Audio Cassettes" on page 62.
1 2 Press TAPE on
Switch the system
on by pressing the player to
select the Tape
STANDBY ON.
function.
Press the
4 5
Press the
button. The cassette
button if necessary.
starts playing.
• •
Side A : Tape ( ) button once. Rewind the cassette
• button.
Side B : Tape ( ) button twice
•
Fast-forward the cassette UP /
Press Tape 1/2 button to select the
button.
cassette to be played.
49
Press the PUSH
3
EJECT ( ) of the
cassette deck to open
the cassette door and
insert a cassette.
•
Insert a cassette with the
recording/playback side facing
the cassette holder, and then
push the cassette door shut.
When you have
6
,
finished playback,
press STOP button.
/ DOWN
Selecting the Cassette Playback Mode
Your mini component system has three cassette playback modes which
enable you to listen to both sides of a cassette automatically. .
Press REVERSE MODE until the appropriate
symbol is displayed.
• One side of the selected cassette and then stops.
:
One side of the cassette.
•
:
The other side of the cassette and then stops.
Both sides of the cassette indefinitely until you
•
:
press stop.
Tape Counter
When playing a cassette in one of the cassette
decks, a counter is displayed to enable you to
take note of the counter value at the start of
each track to start playback at the
beginning of the track to which you wish to
listen.
•
Before starting to record a cassette for which you wish to take
note of the counter values at the beginning of each track, reset
the counter by pressing COUNTER RESET .
•
Each cassette deck has a separate counter.
50