Table of Contents
Advertisement
Connecting to an External Source
The auxiliary input can be used to take advantage of the
sound quality of your mini-compact system when listening to
other sources.
Examples:
A television
A video disc player
A Hi-Fi stereo video cassette recorder
To connect the external source, the source must have an audio
output. In addition, you need an RCA connection cable.
1
Set the system to standby mode and disconnect it and the external
source from the main.
2
Connect the audio cable to the rear of the mini-compact system.
Connect the...
To the connector marked...
Red jack
R (right)
White jack
L (left)
For optimum sound quality, do not invert the right and left
channels.
3
Plug the system back into the main socket and press Standby/On to
switch it on.
4
Select the AUX source by pressing AUX.
Result: AUX is displayed.
5
Switch the external source on.
6
Adjust the volume and balance as required:
Volume
Equalizer
Example: You can watch a film and take advantage of stereo sound
provided that the original sound track is in stereo (as if you
were in a cinema).
3
4
8
Video Output Selection
Press the Dolby Surround button in POWER OFF, then it is converted to
"
" and select the TYPE you want.
Example : Select PAL, if TV is for PAL.
When disk is set to NTSC in PAL, it doesn't operate.
Connecting the Loudspeakers
Back of the Speakers
1
Press down the terminal
2
Insert the wire into the
tab on the back of the
terminal and release the
speaker.
terminal tab.
•
Insert the black wire into he black (-)
terminal and the gray wire into the
gray (+) terminal.
•
Make sure the polarities (+ and -)
are correctly.
Black
Front Speaker (R)
Subwoofer(R)
Front Speaker (L)
Subwoofer(L)
Center Speaker
Rear Speaker (L)
Rear Speaker (R)
Back of the Main Unit
3
Connect the connecting jacks to
the back of the DVD player.
•
Make sure the colors of the speaker terminals
match the colors of the connecting jacks.
•
Make sure the polarities (+ and -) are correctly.
Gray
GB
9
Advertisement
Table of Contents
