Connecting To An External Source; Connecting The Loudspeakers - Samsung MAX-VS6250 Instruction Manual

MAX-VS6250 GB-1~18 4/28/03 14:25

Connecting to an External Source

GB
The auxiliary input can be used to take advantage of the sound quality
of your mini-compact system when listening to other sources.
Examples: A television
A video disc player
A Hi-Fi stereo video cassette recorder
To connect the external source, the source must have an audio out-
put. In addition, you need an RCA connection cable.
1
Set the system to standby mode and disconnect it and the external
source from the main.
2
Connect the audio cable to the rear of the mini-compact system.
Connect the...
Red jack
White jack
For optimum sound quality, do not invert the right and left
channels.
3
Plug the system back into the main socket and press Standby/On to
switch it on.
4
Select the AUX source by pressing AUX.
Result: AUX is displayed.
5
Switch the external source on.
6
Adjust the volume and balance as required:
Volume Equalizer
Example: You can watch a film and take advantage of stereo sound
provided that the original sound track is in stereo (as if you
were in a cinema).
3
8
Page 8
To the connector marked...
R (right)
L (left)
4

Connecting the Loudspeakers

The loudspeaker connector terminals are located on the rear of the
system.
1
Press and hold the terminal tab.
2
Insert the speaker cord.
3
Release the finger.
L
R
Directions in Installing Speaker
Installation in a place near heating apparatus, under direct lay of
light or with high humidity may cause performance degradation
of the speaker.
Do not install on the wall or on a high place of pole or other
unstable place to prevent any safety accident caused by falling
of the speaker.
Do not take the speaker apart from TV or computer monitor.
The speaker near the TV or computer monitor may influence the
quality of the screen display.