Speaker Installation; Connecting The Optional Wireless Receiving Amplifi Er - Samsung HT-KX30 Instruction Manual

Speaker Installation

You have the option of installing the speakers on Stands, or directly to the Stand Base.
Speaker Components
(HT-TKX35 only)
SPEAKER STAND
How to Install the Speaker on the Stand
1 2
3 4
5 6
How to Install the Speaker on the Stand Base
1 2
3
14
STAND BASE Screw (A) Screw (B)
1
Turn the STAND upside-down and connect it to the
STAND BASE.
2
Insert two screws (A) into the two holes marked with
arrows using a screwdriver as shown in the illustration.
3
Insert a screw (B), into the hole on the rear of the Speaker
STAND.
4
Connect the assembled stand to the SPEAKER.
5
Insert another screw (B) into the hole on the rear of the
speaker using a screwdriver as shown in the illustration.
6
This is the SPEAKER successfully assembled with the
Stand.
• Make sure that the speaker is installed on a fl at and stable
area. Otherwise it may be easily knocked over.
1
Connect the SPEAKER with the STAND BASE.
2
Insert the screw (B) into the hole on the rear of the speaker
using a screwdriver as shown in the illustration.
3
This is the SPEAKER successfully assembled with the
Stand Base.
Connecting the Optional Wireless Receiving Amplifi er
To connect the rear speakers wirelessly, you have to purchase the wireless receiving module and
TX card from your Samsung retailer.
When you have Purchased the Wireless Receiving Module (SWA-3000)
HT-KX30
Rear Speaker (L)
WIRELESS RECEIVER MODULE
HT-TKX35
Rear Speaker (L)
WIRELESS RECEIVER MODULE
Center Speaker
Front Speaker (R) Front Speaker (L)
Subwoofer
Rear Speaker (R)
Front Speaker (R)
Front Speaker (L)
Center Speaker
Subwoofer
Rear Speaker (R)
GB
15