Speaker Installation - Samsung HT-KX20 Instruction Manual

Connecting the Speakers
HT-TKX25
Front Speaker (R)
Rear Speaker (R)
Connecting the Speakers
(HT-TKX22/HT-TKX25 only)
1 2
Black Red
• Do not let children play with or near the speakers. They could get hurt if a speaker falls.
• When connecting the speaker wires to the speakers, make sure that the polarity (+/ –) is correct.
• Keep the subwoofer speaker out of reach of children so as to prevent children from inserting their hands or alien
substances into the duct (hole) of the subwoofer speaker.
• Do not hang the subwoofer on the wall through the duct (hole).
• If you place a speaker near your TV set, screen color may be distorted because of the magnetic fi eld generated
by the speaker. If this occurs, place the speaker away from your TV set.
14
(Con't)
Center Speaker
Front Speaker (L)
Rear Speaker (L)
Subwoofer
1
Press down the terminal tab on the back of the speaker.
2
Insert the black wire into the black terminal (–) and the red
wire into the red (+) terminal, and then release the tab.
3
Connect the connecting plugs to the back of the Home
Theater.
 Make sure the colors of the speaker terminals match the
colors of the connecting plugs.

Speaker Installation

With the HT-TKX22 front speakers and HT-TKX25 front/rear speakers, you have the option of installing the speakers
on Stands, or directly to the Stand Base.
Speaker Components
(HT-TKX22/HT-TKX25 only)
SPEAKER STAND STAND BASE
How to Install the Speaker on the Stand
1
1 2
2
3
3 4
4
5
6
5 6
How to Install the Speaker on the Stand Base
1
1
2
2
3
3
Screw (A) Screw (B)
Turn the STAND upside-down and connect it to the
STAND BASE.
Insert two screws (A) into the two holes marked with
arrows using a screwdriver as shown in the illustration.
Insert a screw (B), into the hole on the rear of the Speaker
STAND.
Connect the assembled stand to the SPEAKER.
Insert another screw (B) into the hole on the rear of the
speaker using a screwdriver as shown in the illustration.
This is the SPEAKER successfully assembled with the
Stand.
• Make sure that the speaker is installed on a fl at and stable
area. Otherwise it may be easily knocked over.
Connect the SPEAKER with the STAND BASE.
Insert the screw (B) into the hole on the rear of the speaker
using a screwdriver as shown in the illustration.
This is the SPEAKER successfully assembled with the
Stand Base.
GB
15