Setting the Speaker Mode
Signal outputs and frequency responses from the speakers will automatically be adjusted according to your
speaker configuration and whether certain speakers are used or not.
1
47
Press Cursor
In Stop mode,
2
button to move to
press MENU
'Audio' and then
button.
press ENTER button.
In the Speaker Setup,
3
4
press the ENTER button
again.
SMALL : Select this when using the speakers.
NONE : Select this when no speakers are connected.
Note
•
• Depending on PRO LOGIC and STEREO settings, the speaker mode may vary (see page 57).
Press Cursor
,
,
,
buttons to move to
the desired speaker and
then press ENTER button.
•
For C, SL, and SR, each time the button
is pressed, the mode switches
alternately as follows: SMALL
NONE.
•
For L and R, the mode is set to SMALL.
48
GB