Page 2
Connections Power Button Power Status LED Indicator (ON : Green, Standby : Flash) HDD Status LED Indicator (Orange Flash : R/W) USB 3.0 Port LAN Network (RJ45) USB 2.0 Port c,d,e USB 3.0 Port DC-IN Jack Grounding...
Page 3
Installation of the power cord bracket 1. One power cord bracket and screw in accessories box. 2. Remove all power and confirm that the power supply is disconnected from its power source. 3. Fasten the power cord bracket on the rear side of the System Controller with one screw.
Page 4
3. Fasten the ground wire to the screw (a) on the rear side of the System Controller. Attach the other end as required by local regulations.
Need help?
Do you have a question about the GSC-7153W and is the answer not in the manual?
Questions and answers