imec Neuropixels OneBox Product Safety & Installation Manual page 20

3 Installation and mounting
This Chapter describes how to install the Neuropixels ONE_1000. Make sure you have the following
hardware components available:
3.1 Neuropixels ONE_1000 components
As described in paragraph 1.3, the kit contains:
1x ONE_1000 acquisition module
1x Power adapter
1x USB 3.1 cable
Figure 9: ONE_1000 kit components
3.2 Neuropixels System Components
For more information about Neuropixels specific components such as Headstages, cables, Probes,
and other system components, please refer to the OneBox product manual.
Important safety and compliance information
www.imec.com Copyright©imec Neuropixels_OneBox_User_Safety_Manual_V1-0-1
20