Pioneer CT-M5R Operating Instructions Manual

Thank you for buying this Pioneer product.
Please read through these operating instructions so you will
know how to operate your unit properly. After you have finished
reading these instructions, keep the manuat in a safe place for,
future reference.
In some countries or regions, the shape of the power plug and
power outlet may sometimes differ from that shown in the draw-
ings. However, the method of connecting and operating the unit
is the same.
WARNING: TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE THIS APPLI-
ANCE TO RAIN OR MOISTURE. i
IMPORTANT NOTICE
[For U.S. and Canadian models]
The serial number for this equipment is located on the rear panel
Please write your serial number on your enclosed warranty card
and keep it in a secure area. This is for your security
[For Canadian model]
This digital apparatus does not exceed the Class B limits for radio.
noise emissions from digital apparatus set out in the Radio Inter-
ference Regulations of the Canadian Department of Communica-
tions.
[Pour te modéle Canadien]
Uinterférence radioélectrique geneérée par cet appareil numérique
de type B ne dépasse pas les limites énoncées dans le Réglement
sur les perturbations radioélectriques, section appareil numérique,
du Ministere des Communications
[For Canadian model]
LINE VOLTAGE SELECTOR SWITCH
Only multi-voltage models are provided with this
switch.
U.S., Canadian, European, U.K., and Australian
models are not provided with this switch.
Mains voltages in Saudi Arabia are 127V and
220V only. Never use this model with 110V set-
ting in Saudi Arabia.
The line voltage selector switch is on the rear panel. Before your
model is shipped from the factory, this switch is set to the power
requirements of the destination. Check that it is set properly
before plugging the power cord into the AC wall socket. If the
voltage is not properly set or if you move to an area where the
voltage requirements differ, adjust the selector switch as follows.
1. Disconnect the power card.
2. Use a medium-size screwdriver.
3. Insert the screwdriver into the groove on the voltage selector,
and adjust so that the tip of the arrow points to the voltage
value of your area
Set the voltage selector
for the voltage in your area.
Medium-size screweriver.
-
| "This product complies with the Radio interference require-
| ments of the EC (European Community) Directive 87/308/EEC."
@ PIONEER:
The future of sound and vision.